B&B Electronics EIR608-xSFP Tftp Commands Set, SystemLog, Smtp and Event Commands Set, Authorize

authorize]		configuration	switch(config-if)#8021x portstate
		command to set the	accept
		state of the selected
		port.
			switch>show 8021x
show 8021x	E	Displays a summary of
		the 802.1x properties
		and also the port
		sates.
			switch(config)#no 8021x
no 8021x	G	Disable 802.1x
		function

TFTP Commands Set

Commands	Level	Description	Defaults Example
			switch(config)#backup
backup	G	Save configuration to
flash:backup_cfg		TFTP and need to	flash:backup_cfg
		specify the IP of TFTP
		server and the file name
		of image.
			switch(config)#restore
restore flash:restore_cfg	G	Get configuration from
		TFTP server and need to	flash:restore_cfg
		specify the IP of TFTP
		server and the file name
		of image.
			switch(config)#upgrade
upgrade	G	Upgrade firmware by
flash:upgrade_fw		TFTP and need to	lash:upgrade_fw
		specify the IP of TFTP
		server and the file name
		of image.

SystemLog, SMTP and Event Commands Set

Commands			Level	Description		Example
						switch(config)# systemlog ip
systemlog ip			G	Set System log server
[IP address]				IP address.		192.168.1.100
40
		Manual Documentation Number: EIR608-xSFP_0708m
	B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax				815-433-5104 – www.bb-elec.com
	B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444				– Fax +353 91-792445 – www.bb-europe.com