System Information
System Name: A name (64 bytes max) can be assigned to the switch.
System Description: Displays the description of switch. Read only cannot be modified
System Location: A physical location (64 bytes max) can be assigned to the switch.
System Contact: Enter the name of contact person or organization
Firmware Version: Displays the switch’s firmware version
Kernel Version: Displays the kernel software version
MAC Address: Displays the unique hardware address assigned by manufacturer (default)
IP Configuration
Configure the IP Settings and DHCP client function
DHCP Client: Used to enable or disable the DHCP client function. When enabled, the switch’s IP address is assigned by the network DHCP server. The default IP address will be replace by the DHCP server assigned IP address. After clicking the ‘Apply’ button, a popup dialog will indicate that the current IP will be lost and the new IP address must be retrieved from the DHCP server.
IP Address: A static IP Address may be assigned. The default IP is 192.168.16.1.
Subnet Mask: Assign the subnet mask of the IP address. This does not have to be done if the DHCP client function is enabled.
Gateway: Assign the network gateway. The default gateway is 192.168.16.254.
DNS1: Assign the primary DNS IP address.
DNS2: Assign the secondary DNS IP address.
Click Apply 
Manual Documentation Number: | 47 |
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353