Apex Digital model 140DX manual Caps LOCK+SHIFT+CONTROL+ALT

Page 59

T r o u b l e s h o o t i n g		Apex OutLook 140DX/180DX Switch User Guide	59

Keyboard (continued)

SYMPTOM	PROBABLE CAUSE	RECOMMENDED SOLUTION

Keyboard	Console keyboard	Check for loose console keyboard
signal did		cable.
work on all		Reconnect the console keyboard
servers, but		Reconnect the console keyboard
servers, but		cable.*
then stopped		cable.*
then stopped		Check maximum length of the
		Check maximum length of the
or		console cable extension (maximum
Keyboard		length = 12 feet).
Keyboard		Replace the console keyboard.*
signal never		Replace the console keyboard.*
signal never
did work on		Press the Reset button on the back
all servers		panel of the switch (must have
		performed Snapshot in order for the
		reset function to work properly).
		Check for loose interconnecting
		keyboard cables.

Keyboard	Updated system	Check the internet for the latest
error on	software	firmware version of the keyboard.
startup

Keystrokes	Server keyboard left	Press both SHIFT keys to change
shifted,	in shifted state	keystrokes to lower case or upper
swaps upper	when last selected	case.
case for lower
case

Keystrokes Console keystrokes

are not stuck in a locked

working mode properly

At the console keyboard:

On the left side of the keyboard, press

CAPS LOCK+SHIFT+CONTROL+ALT

On the right side of the keyboard, press

ALT+CONTROL+SHIFT

*Some servers require restarting when the keyboard cable is disconnected from the server. For this reason, perform these tests when the server can be restarted.

Image 59

Contents OutLook Switch User Guide USA Safety Safety IBM Personal Computing Web sites Getting HELP, SERVICE, and InformationContents Updating the Firmware Product Overview OverviewFeatures FeaturesHYDR-002.EPS QUICK2START To Setup an 8-Port Switch Connect consoles to switch Power UP Your Switch System Rack Installation InstallationCable Lengths Using Locking Cable ConnectorsTo properly disconnect the keyboard or mouse cable Disconnecting CablesDisconnecting Cables Connecting the Keyboard Cable in the Proper Sequence Connecting CablesConnecting Cables Statement Connecting the Cables To power up the system Starting the Switch BOXStarting the Switch BOX Powering UP the SystemStarting the Computers Configuring the Switch BOXStarting the Computers Resetting the Unit Unattended RebootUnattended Reboot Making Connections Under Power Making Connections Under PowerPrimary Secondary Alternative ConfigurationsAlternative Configurations Tiered Switch ConfigurationConnecting Tiers while the System is Powered Up Oscar Selection Screen Launching OscarOscar Selection Screen Oscar Status Port Symbols Oscar Status Port SymbolsCommand Summary Command SummaryExiting Oscar Oscar Advanced Menu ScreenOpening Oscar Advanced Menus Selecting Computers Selecting ComputersSwitching Tiered Systems Switching Tiered SystemsTo assign unique names to computers Assigning Unique Names to ComputersAssigning Unique Names to Computers I N G O S C a R Apex OutLook 140DX/180DX Switch User Guide To change menu attributes Changing Menu AttributesChanging Menu Attributes Screen Appearance Settings To change status flag attributes Changing Status Flag AttributesChanging Status Flag Attributes Flag Appearance Settings Values and Effects of Settings on Flag AppearanceScanning the Computers Canceling scan modeScanning the Computers Setting a custom scan pattern To set a custom scan pattern Scanning the Computers To broadcast to selected computers Broadcasting CommandsBroadcasting Commands Broadcasting to Tiered Configurations To turn off the broadcast modeTo broadcast to tiered configurations To turn off broadcast mode for a tiered configura- tion Securing Server Access Securing Server AccessSecurity Configuration Settings Turning off the Screen Saver To turn off the screen saver Securing Server Access Displaying Version Information To display version information and device settingsDisplaying Version Information To save the hardware settings Saving the Hardware SettingsSaving the Hardware Settings To reset the mouse and keyboard values Resetting the Mouse and KeyboardResetting the Mouse and Keyboard To assign a device type Assigning Specific Device TypesAssigning Specific Device Types Capturing the Screen To capture the screen using the Print Screen keyUpdating the Firmware Updating FirmwareTo update firmware Troubleshooting Replace the console keyboard EffectCaps LOCK+SHIFT+CONTROL+ALT Mouse cable Check for loose mouse cable Switch selects Firmware Appendix SpecificationsEuropean Union EMC Directive conformance statement Regulatory Compliance NoticesP e n d i General Requirements Power Cord SET RequirementsCountry-Specific Requirements Apex OutLook 140DX/180DX Switch User Guide