Black Box kv1081a, kv1161a Logging in and out, To select a computer using mouse buttons, To log

To select a computer using mouse buttons

Note: This procedure works only with three-button or IntelliMouse devices and only if the ‘Mouse Switching’ option has been enabled by your administrator.

1Hold down the middle button (or scroll wheel) of the mouse.

2Click the left mouse button to select the next computer port. When the correct port is reached, release the middle button.

Note: Clicking the left mouse button will select the highlighted port in shared mode (other users can also view the computer). To select the port in

private mode, hold and then click the left mouse button.

Note: If security has been enabled then only computers to which you have permission will be displayed.

To select a computer using mouse buttons – Advanced method

1Select the on-screen menu by pressing the middle and right buttons of a three button mouse.

2Use the scroll wheel to highlight the required computer port.

3Then, select either:

•Shared Use - press the left mouse button - This standard method allows other users to view the same computer port. Control of the port is given to one user at a time, on a first-come, first-served basis and is relinquished after a certain period of inactivity.

•Escape without selecting a port – press the right mouse button.

Logging in and out

The ServSwitch CX Uno IP features a straightforward security system that helps to prevent unauthorized access to some, or all connected computers.

If the security option has been selected by your administrator then you will be asked to enter a User Name and Password when you first access a user port. When you have finished using the computer, it is then good practice to logout, forcing any other users to authenticate themselves prior to use.

Note: If the security option has not been enabled then no login is required.

To log in

1If it is not already displayed, move the mouse or press any key to display the log in screen.

 

Enter your Login

 name here 

2Enter your designated User Name and press .

3Enter your designated Password and press . If both entries are correct then the selected port will be displayed.

Note: If either the User Name or Password are incorrect, the entries will be cleared to allow another attempt.

To log out

Either:

•Press and at any time to log out.

or

1 Display the Select Host menu in either of two ways:

•By simultaneously pressing and then releasing .

Note: The and hotkeys may have been changed. If the combination fails to work, then please contact the system administrator for details.

•By pressing the middle and right buttons of a three button mouse, or

2Press . You will be logged out and the screensaver will be displayed. Press a key or move the mouse to re-display the login window.

®

   



36