Black Box servswitch cx uno ip, kv1081a, kv1161a manual ServSwitch CX Uno IP features front and rear

ServSwitch CX Uno IP features - front and rear

The ServSwitch CX Uno IP units pack a great deal of functionality into a compact space. Both models occupy half of a single 1U rack space and provide most of their connectors at the rear face. The smart front face features the remote user link port and the operation indicators.

®

® BLACK BOX®

724-746-5500

Options port

This RS232 serial port can separately support the following functions:

•Power switching - can be configured to control multiple power switching devices.

•Remote control switching - commands can be received that will change the channel, as necessary.

•Synchronization - allows the actions of two or more ServSwitch CX Uno IP switches to be synchronized so that multiple computers/video screens can be switched and accessed.

LOC REM VNC 100 LNK PWR	BLACK BOX	CX Uno IP	IP network port
			The port by which global users are linked to
			the ServSwitch CX Uno IP unit. This intelligent
			Ethernet port can automatically sense whether
			it is attached to a 10Mb or 100Mb network.

Indicators

These six indicators clearly show the key aspects of operation:

•LOC Keyboard or mouse data are being received from the local console.

•REM Keyboard or mouse data are being received from the remote console.

•VNC Indicates that a global user is connected and active.

•100 Indicates the Ethernet network speed (10/100Mbs).

•LNK Indicates that a network link is present.

•PWR Indicates that power is present.

   

		16	15	14	13	8	7	6	5	ONLY
		OPTIONS
										USE
Power input										INDOOR
The power supply	5V	12	11	10	9	4	3	2	1
connects here.	2.0A
			COMPUTER CONNECTIONS				COMPUTER CONNECTIONS



Local user port

Connect a USB keyboard and mouse, plus a video monitor to these connectors. These allow you to perform the initial configuration of the ServSwitch CX Uno IP. Additionally, you can use these to locally control the connected computer(s).

Computer ports

Each computer connects to one of these ports via standard category 5, 5e or 6 cabling. At the other end of the cabling a SAM (Server Access Module) is used to provide the necessary keyboard, video, and mouse connections.