Black Box ET0100A, ET1000A, ET0010A manual Weee Directive, RoHS Directive, Regulatory Information

Page 77

Appendix A Environmental and Regulatory Information

WEEE Directive

Black Box is committed to environmentally responsible behavior. As part of this commitment, we have put in place a product end-of-life management solution that meets the European Union’s Waste Electrical and Electronic Equipment (WEEE) Directive. All products shipped from the Black Box manufacturing facility have the appropriate WEEE markings and qualify for the recycling program. Black Box products that have reached the end of their useful life are to be recycled. Send all requests for recycling to info@blackbox.com. Black Box will arrange for pick up and transport to a recycling location that complies in an environmentally responsible manner with the EU WEEE Directive.

RoHS Directive

The Restriction of Hazardous Substances (RoHS) Directive restricts the use of certain materials that are commonly found in electronic products. Restricted substances are heavy metals, including lead, and poly- brominated materials.

Black Box has eliminated or substantially reduced its usage of the prohibited materials. However, the RoHS Directive allows a lead-in-solder exemption for Category 3 Telecommunications Products. It is Black Box’ position that its network security products qualify for the lead-in-solder exemption.

Black Box is committed to completely eliminating its use of RoHS prohibited materials as that becomes technically feasible. We are constantly monitoring the availability of lead-free components and the progress of the lead-free manufacturing processes. We pledge to continually evolve and refine our products and processes as viable alternatives that do not impact product reliability or performance become available.

For more information on the status of our RoHS efforts or product-specific environmental questions, please e-mail us at info@blackbox.com.

Regulatory Information

This section contains regulatory information for the following Black Box appliances:

ETEP Installation Guide

77

Image 77
Contents EncrypTight Enforcement Point Etep Installation Guide Page Table of Contents Initial Setup Maintenance Index Purpose Contacting Black Box Technical SupportIntended audience AssumptionsAbout This Document Etep Installation Guide Etep Introduction Multipoint Ethernet Encryption using EncrypTight ManagerET0010A Physical Description Front Panel ConnectorsRear Panel Status IndicatorsIndicator Light State Indication ET0100A Physical Description Front Panel ConnectorsLED Indicators Rear Panel ET0100A Front Panel LED IndicatorsET0100A Rear Panel ET1000A Physical DescriptionET1000A Front Panel LED Indicators ET1000A LED IndicatorsET1000A Rear Panel Power Supply #ET10000A Physical Description ET10000A Front Panel ConnectorsET10000A Front Panel LED Indicators ET10000A LED IndicatorsET10000A Rear Panel Etep Feature Summary FeaturesCategory Feature Etep Hardware ComparisonET0010A Mechanical and Environmental Specifications SpecificationsSpecification CategoryCategory Specification ET0100A Mechanical and Environmental SpecificationsET1000A Mechanical and Environmental Specifications MIB Support ET10000A Mechanical and Environmental SpecificationsModule Filename Etep MIBsProduct Overview Etep Installation Guide Software Requirements Safety GuidelinesSoftware How it’s used Vendor Etep Site PreparationThird party management station software Firewall ports Installation Instructions ET0010AFirewall Ports To install the Etep in a rack Rack Mount InstallationConnect the power supply cable to the rear panel connector To install the Etep on a solid surface Solid Surface InstallationScrew holes for rubber feet installation on bottom of unit To cable the ET0010A Connecting the Cables ET0010AET0010A Cabling Powering On the ET0010AET0100A Installation Steps Installing the ET0100ACabling Requirements ET0100A ET0100A Standard CablesUnpacking the Shipping Carton ET0100A Rack-Mount Installation ET0100ATo cable the ET0100A Connecting the Cables ET0100ATo power on the ET0100A Powering on the ET0100AImproperly seated ET0100A power cable Installing the ET1000ACabling Requirements ET1000A ET1000A Installation StepsET1000A Standard Cables ET1000A Port Cabling Supplied byUnpacking the Shipping Carton ET1000A Rack Mount Installation ET1000AMounting bracket orientation To install the ET1000A in a rackConnecting the Cables ET1000A Grounding of DC Power Supply ET1000AFor DC Power Supply Only For Earth ConnectionET1000A Cabling Powering on the ET1000ATo power on the ET1000A Dual power supplies on the ET1000A rear panelET10000A Installation Steps Installing the ET10000AET10000A Standard Cables Cabling Requirements ET10000AUnpacking the Shipping Carton ET10000A To install the ET10000A in a rack Rack Mount Installation ET10000ATo cable the ET10000A Connecting the Cables ET10000ASafety Guidelines Powering on the ET10000ATo power on the ET10000A Power-Up ProcedureShutdown operational codes Shutting Down the EtepTo shut down the Etep from the CLI Appliance model Operational codeShutting Down the Etep Installation Etep Installation Guide To log in to the CLI via a serial link OverviewLogging In Through a Serial Link About the management port IP address, mask and gateway Configuring the Management PortLink speed Duplex mode Auto-negotiate Fixed Speed All ETEPs To configure the management portAbout auto-negotiation Link speeds on the management portAttribute Description Management port autoneg command descriptionTo set the date and time Setting the Date and TimeEntering a Throughput License To add a license from the command lineEtep Throughput Speeds Model Available ThroughputTo view the Etep throughput speed Configuration ExampleManaging the Etep Etep CLI User Guide EncrypTight Manager User Guide What To Do If an Appliance Fails Preventative MaintenanceReplacing a Power Supply Obtaining a License for Replacement UnitsReplacing the ET1000A Power Supply To replace a power supply in the ET1000ATo replace a power supply in the ET10000A Replacing the ET10000A Power SupplyPower supply bracket is secured with two screws Tamper Switch and Zeroization Cable Pinouts To recover the Etep following zeroizationRS-232 Serial Cable ET0010A and ET10000A RJ-45 Pin DB-9 PinPin RS-232 Serial Cable ET0100A, ET1000A ModelsMaintenance Etep Installation Guide Symptom Explanation and Possible Solution Symptoms and SolutionsLED Indicators Temperature Threshold and Discarded Traffic Error StateError State Symptoms and Solutions Symptom Explanation and Possible SolutionsStatus Codes ET0010A Diagnostic Code DisplayET0010A Self-Tests Status LEDs Illuminated DescriptionET0010A Operational Codes Diagnostic Codes ET0100A, ET1000A and ET10000AEtep Self-Tests Etep Operational CodesRegulatory Information Weee DirectiveRoHS Directive ET0010A Regulatory Information SafetyImmunity EmissionsEuropean Notice ET0100A Regulatory InformationET0100A Cabling ET1000A Regulatory InformationEMI/EMC ET10000A Regulatory Information Normas Oficiales Mexicanas NOM Electrical Safety StatementRegulatory Information Page Index LEDs See also license Black Box Tech Support FREE! Live /7
Related manuals
Manual 48 pages 53.09 Kb Manual 352 pages 21.02 Kb

EncrypTight Enforcement Point (ETEP), ET10000A, ET0100A, ET0010A, ET1000A specifications

The Black Box ET1000A, ET0010A, EncrypTight, and ET0100A are advanced solutions designed for secure data transmission and network management, catering to modern enterprise needs. These tools integrate cutting-edge technologies to enhance connectivity, security, and efficiency within various environments.

The Black Box ET1000A is primarily a high-performance Ethernet over Twisted Pair (EoTP) solution. It enables users to extend Ethernet signals over long distances using existing twisted-pair cabling without sacrificing speed or reliability. With support for speeds up to 100 Mbps, this device is ideal for organizations looking to upgrade their existing infrastructure without extensive rewiring. Key features include plug-and-play installation, which simplifies deployment, and versatile compatibility with both legacy and modern ethernet networks.

The ET0010A model takes connectivity a step further by providing seamless integration with fiber optics. This device supports transmission distances that far exceed traditional copper solutions, making it a perfect fit for larger facilities or multi-building campuses. Its built-in Ethernet switch enhances network efficiency by providing multiple ports for device connectivity, thus facilitating greater data flow.

EncrypTight technology is a notable feature across these Black Box models, offering advanced encryption capabilities to safeguard sensitive data during transmission. With military-grade encryption protocols, EncrypTight ensures that corporate information remains secure from potential eavesdroppers. This technology is essential for businesses operating in regulated industries or that handle confidential customer information.

The ET0100A model combines intelligence with monitoring features to provide users with comprehensive network insights. It boasts built-in diagnostic tools that enable IT professionals to troubleshoot issues quickly and efficiently. Additionally, it features real-time performance monitoring, allowing users to analyze bandwidth usage and optimize network performance accordingly.

In conclusion, the Black Box ET1000A, ET0010A, EncrypTight, and ET0100A are powerful tools that embody the latest in data transmission and network management technologies. With their unique features—including extended connectivity capabilities, robust encryption technologies, and real-time monitoring solutions—these devices cater to the growing demands of businesses seeking to enhance their network infrastructure while ensuring robust security and efficiency. Integrating these tools into any organization’s operations can fundamentally improve both performance and data protection, making them indispensable in today’s digital landscape.