CHAPTER 6: Installation
NOTES
If the switch is a ServSwitch Multi, keep these things in mind as you match the serial and audio cables/strands:
–The proper DB9 serial connector to use on its User Cable is the one without a yellow band.
–The audio cable from the Local Unit’s “Out” connector should be plugged into the
–The audio cable from the Local Unit’s “In” connector should be plugged into the audio connector without a blue band on the User Cable.
Also bear in mind that the microphone strand of the ServSwitch Multi User Cable (the one with the
ServSwitch
Multi EXP
Included KVM- extension cable
Local Unit
User cable KV2505 or
KV2515 (plugs into
User Card)
(Serial and audio cables included with the KVM/Serial/Audio model)
Figure 6-4. Attaching a KVM switch with a single incompatible user-port
connector to the Local Unit’s CPU port.
35