Black Box ACU3022A, ACU3009A, ACU3001A, cat5kvm micro extender manual Installation

CHAPTER 6: Installation

5.If the Local Unit’s LED shows that the link between the Units appears to be working, make sure that the remote keyboard functions and that you’re getting video at the remote site. (Be aware that in Dual-Access systems, remote monitors, keyboards, and mice might take up to several seconds to be properly initialized; see Section 7.3.3. Note also that the video quality might be poor at this point if your interconnect cable is longer than 25 m [80 ft.] and you haven’t set the Extender’s DIP switch to compensate for this; see Section 5.1.)

6.Make sure the remote mouse functions. (If your PC normally boots up in DOS, you will need to run Windows or some application that supports the mouse.)

7.KVM/Serial/Audio systems only: Make sure that any serial device attached to your Remote Unit is working. You might need to load a driver or run an application in order for the CPU to be able to detect and handle the serial data.

8.KVM/Serial/Audio systems only: Make sure that any audio devices attached to your Remote Unit is working.

If everything works in your test setup, repeat the above steps for your actual installation. If everything works in the actual installation, your ServSwitch™ Brand CAT5 KVM Micro Extender system should be ready for continuous operation.

41