Cisco Systems AIRONET 1000 manual Power output settings CCK

Page 67

Appendix C Access Point Specifications

Table C-1

Access Point Specifications (continued)

 

 

 

 

 

 

 

 

 

Specifications

 

 

 

 

 

 

 

Category

 

802.11b

802.11g

802.11a

 

 

 

Power output settings CCK

OFDM

OFDM

 

 

 

 

 

 

 

100, 50, 12.5, and 6.25 percent settings on the controller

 

 

 

 

 

 

 

 

100 mW (20 dBm) conducted

50 mW (17 dBm) conducted

 

 

 

 

 

 

 

 

Maximum output power depends on the regulatory domain in which the access point is installed

 

 

 

 

 

Antenna

 

AIR-AP1010

 

 

•Two integrated 6 dBi patch antennas (2.4 and 5 GHz) AIR-AP1020 and AIR-AP1030

•Two integrated 6 dBi patch antennas (2.4 and 5 GHz)

•Three external antenna connectors

Frequency

2.400 to 2.497 GHz

 

5.15 to 5.25 GHz

 

 

(Depending on the regulatory domain in which the access point is

5.25 to 5.35 GHz

 

 

installed)

 

5.475 to 5.725 GHz

 

 

 

 

 

 

5.725 to 5.85 GHz

 

 

 

 

 

 

(Depending on the regulatory

 

 

 

 

 

 

domain in which the access point

 

 

 

 

 

 

is installed)

 

 

 

 

 

 

Data rates

1, 2, 5.5, and 11 Mbps

6, 9, 12, 18, 24, 36, 48, and 54 Mbps

 

 

 

 

 

 

Typical indoor range

160 ft (49 m) @ 11 Mbps

90 ft (27 m) @ 54 Mbps

45 ft (14 m) @ 54 Mbps

 

(across open office

410 ft (125 m) @ 1 Mbps

180 ft (100 m) @ 18 Mbps

110 ft (34 m) @ 18 Mbps

 

environment)

 

 

 

300 ft (91 m) @ 6 Mbps

165 ft (50 m) @ 6 Mbps

 

 

 

 

 

 

Compliance

The 1000 series access point complies with UL 2043 for products installed in a building’s

 

 

environmental air handling spaces, such as above suspended ceilings.

 

 

 

 

 

 

 

 

 

Caution The power injector and power module have not been tested to UL 2043 and they should not

 

 

 

 

be placed in a building’s environmental air space, such as above suspended ceilings.

 

 

 

 

 

 

 

 

 

 

 

 

Safety

Designed to meet:

 

 

 

 

IEC 60950-1

 

 

 

 

UL 60950-1

 

 

 

 

CSA 60950-1

 

 

 

 

EN 60950-1

 

 

 

 

UL 2043

 

 

 

 

 

 

 

 

Radio Approvals

FCC Parts 15.247

 

FCC Part 15.407

 

 

Canada RSS-210

 

Canada RSS-210

 

 

Japan ARIB-STD-33A

 

Japan ARIB STD-T71

 

 

Japan ARIB-STD-66

 

EN 301.893

 

 

Europe EN-300.328

 

 

 

 

 

 

 

 

 

 

Cisco Aironet 1000 Series Lightweight Access Point Hardware Installation Guide

 

C-2

OL-9403-04

 

 

 

Page 66 Page 68
Image 67
Page 66 Page 68
Contents Americas Headquarters Page N T E N T S Troubleshooting Declarations of Conformity and Regulatory Information B-1 OL-9403-04 Audience PrefacePurpose Organization Viii ConventionsPreface Conventions Related Publications Finding the Product Serial Number Xii Overview Hardware Features Guidelines for Using the Access Points2illustrates the left side connectors on the access point Single or Dual-Radio Operation Ethernet Port UL 2043 Certification Typical Layer 3 Access Point Network Configuration Example Network Configuration ExampleTypical Layer 2 Access Point Network Configuration Example Installing the Access Point FCC Safety Compliance Statement Safety InformationGeneral Safety Guidelines Basic Installation Guidelines Unpacking the Access PointPackage Contents Mounting the Access Point in the Correct Direction Before Beginning the Installation3illustrates the right side of the access point Access Point Layout and ConnectorsController Discovery Process 4illustrates the access point LEDs on the top of the unitReview the Mounting Overview section on Deploying the Access Points on the Wireless NetworkMounting Overview Factory-Supplied Mounting Options Attaching the Access Point and Ceiling-Mount Base Mounting Access Points Using a Ceiling-Mount BaseAttaching the Ceiling-Mount Clips to the Access Point Mounting Access Points Using the Ceiling-Mount Clips135674 10 Attaching the Mounting Screws to the Access Point 135671 Mounting the Access Point Using the Flush-Mount Bracket 12 Attaching the Access Point to the Flush-Mount Bracket Connecting the Ethernet and Power Cables Securing the Access Point Using a Security Cable13 Ethernet and Power Ports Connecting to an Ethernet Network with Local Power Powering Up the Access PointReturning MAC Information Troubleshooting Using Dhcp Option Checking the Access Point LEDs Power LED Alarm LED Low Power Condition OL-9403-04 Translated Safety Warnings OL-9403-04 Declarations of Conformity and Regulatory Information For Home or Office USE Vcci Statement for Japan Canadian Compliance Statement Industry CanadaAIR-AP1010-E-K9 / AIR-AP1020-E-K9 / AIR-AP1030-E-K9 EMC Declaration of Conformity for RF Exposure Japanese Translation Chinese Translation English Translation Access Points with Ieee 802.11a RadiosAll Access Points Declaration of Conformity Statements OL-9403-04 Page OL-9403-04 Specifications Category 802.11b 802.11g 802.11a Access Point SpecificationsPower output settings CCK Vcci OL-9403-04 Power output settings CCK Vcci OL-9403-04 Channels and Power Levels OL-9403-04 Figure E-1 Typical Priming Configuration Priming Access Points Prior to DeploymentAppendix E Priming Access Points Prior to Deployment Appendix E Priming Access Points Prior to Deployment OL-9403-04 Configuring Dhcp Option Overview Access Point Vendor Class Identifier VCIQuotation marks must be included Configuring Option 43 for 1000 Series Access PointsType + Length + Value D E IN-2 IN-3 IN-4

AIRONET 1000 specifications

Cisco Systems AIRONET 1000 is a robust wireless access point designed to meet the demands of modern networking environments. This product is particularly beneficial for small to medium-sized businesses seeking to enhance their wireless connectivity while ensuring reliability and security.

One of the standout features of the AIRONET 1000 is its dual-band functionality, operating effectively on both the 2.4 GHz and 5 GHz bands. This capability allows for greater flexibility and improved performance, as users can connect to the least congested frequency for their specific needs. Additionally, the access point supports multiple-input and multiple-output (MIMO) technology, which improves signal quality and enhances data rates by utilizing multiple antennas to transmit and receive data simultaneously.

The AIRONET 1000 is equipped with Cisco's CleanAir technology, providing powerful interference management. This innovation automatically identifies and mitigates sources of wireless interference, ensuring a more stable and consistent connection. Security is another critical aspect of this access point; it includes advanced features such as Wi-Fi Protected Access (WPA), which safeguards network data through encryption protocols, thus protecting sensitive information from unauthorized access.

Furthermore, the Cisco Systems AIRONET 1000 integrates seamlessly with Cisco’s DNA software, allowing for advanced networking capabilities such as network automation, analytics, and security policy enforcement. The access point also supports Power over Ethernet (PoE), simplifying installation by enabling power and data connectivity through a single cable, reducing clutter while enhancing deployment flexibility.

With its lightweight design and compact form factor, the AIRONET 1000 is easy to install and can be placed in various locations, ensuring optimal coverage across an area. Whether in an office, retail space, or educational institution, this access point is built to deliver high-performance wireless connectivity.

In conclusion, the Cisco Systems AIRONET 1000 combines advanced wireless technologies, security features, and ease of deployment, making it a highly effective solution for any organization looking to improve its wireless network infrastructure. Its ability to handle current demands while being scalable for future growth reflects Cisco's commitment to providing reliable and efficient networking results.
Top Page Image Contents