Lathem 2121 manual Change the Motor

Page 14

Model 2121 Time Recorder User’s Guide

Change the Motor

1.Unplug the unit from the AC electrical outlet.

2.Remove cover as described in Unlock and Remove the Cover.

3.Remove type section as described in Changing the Type Section.

4.Disconnect the wire leads by turning each screw one-quarter turn counter-clockwise.

5.Remove the clutch from its shaft by turning it clockwise. Note: The threads of the motor shaft are left handed.

6.Hold the motor bracket and loosen the mounting screws. Remove and retain the screws and bracket from the old motor.

7.Install the clutch on the new motor. Turn it counter-clockwise to tighten.

Caution: Do not over-tighten or bend the clutch. You may damage the internal motor gears.

Page 12

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Model User’s Guide Contents Ordering Accessories Http//shop.lathem.comMount Clock in Suitable Location Unlock and Remove the CoverLift the Type Section Set the Printed Day and Time Day Wheel Set Hands on Clock Face Advance Print Wheels and Hands Lower the Type Section into PlacePage Test that Clock Is Now Set Correctly Close and Lock the UnitChange the Ribbon Change the Type Section Change the Motor Trouble Shooting Warranty One-Year Limited Warranty
Top Page Image Contents