Lathem 2121 manual Advance Print Wheels and Hands, Lower the Type Section into Place

Page 9

Model 2121 Time Recorder User’s Guide

6.Advance Print Wheels and Hands

6.1Turn the main setting wheel, as shown below, to advance both the clock face and the print wheels together.

6.2Use your fingers or a pointed object to rotate the main setting wheel clockwise until it advances the time on the clock face to the current time. Each minute will make a distinct click as you rotate the wheel.

Tip: Advance print wheels and clock face 1 or 2 minutes ahead of the actual time to allow time to complete step 7.

7.Lower the Type Section into Place

7.1Slightly lift the type section.

Page 7

Image 9

Contents Model User’s Guide Contents Http//shop.lathem.com Ordering AccessoriesUnlock and Remove the Cover Mount Clock in Suitable LocationLift the Type Section Set the Printed Day and Time Day Wheel Set Hands on Clock Face Lower the Type Section into Place Advance Print Wheels and HandsPage Close and Lock the Unit Test that Clock Is Now Set CorrectlyChange the Ribbon Change the Type Section Change the Motor Trouble Shooting One-Year Limited Warranty Warranty