Lathem 2121 manual Day Wheel

Page 7

Model 2121 Time Recorder User’s Guide

4.2Before setting type wheels, observe the center position of wheels, as shown by the arrows below. The characters in the center position of each wheel are the characters that will print.

Rotate each wheel with your fingers or a pointed object clockwise until the correct day and time are aligned at the center position. The wheel will click at each position.

Print Wheels

Description

Day Wheel

The top wheel is the Day wheel. Rotate it to the

current day of the week, such as M for Monday.

Hour Wheel

Below the Day wheel is the Hour wheel. Be

sure to set hours to correct AM/PM. PM hours

 

are underlined. AM hours are not underlined.

0-5 Minute

Below the Hour wheel is the 0-5 Minute wheel.

Wheel

If the current time is 2:34 PM, rotate it to 3.

0-9 Minute

The last wheel is 0-9 Minute wheel. If current

Wheel

time is 2:34 PM, rotate this wheel to 4.

Page 5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model User’s Guide Contents Http//shop.lathem.com Ordering AccessoriesUnlock and Remove the Cover Mount Clock in Suitable LocationLift the Type Section Set the Printed Day and Time Day Wheel Set Hands on Clock Face Lower the Type Section into Place Advance Print Wheels and HandsPage Close and Lock the Unit Test that Clock Is Now Set CorrectlyChange the Ribbon Change the Type Section Change the Motor Trouble Shooting One-Year Limited Warranty Warranty
Top Page Image Contents