Lathem 2121 manual Set Hands on Clock Face

Page 8

Model 2121 Time Recorder User’s Guide

4.3When finished, release the red overthrow lever by gently pulling it toward you until it clicks. This prevents the print wheels from being manually turned.

5.Set Hands on Clock Face

5.1Locate the setting wheel on the right side below the clock face.

Caution: Do not manually turn the hands on the clock face.

5.2Rotate the clock setting wheel counter-clockwise to set the clock time to the print time you previously set.

Tip: The arrow on the clock face indicates the correct direction to move the clock setting wheel.

Page 6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model User’s Guide Contents Ordering Accessories Http//shop.lathem.comMount Clock in Suitable Location Unlock and Remove the CoverLift the Type Section Set the Printed Day and Time Day Wheel Set Hands on Clock Face Advance Print Wheels and Hands Lower the Type Section into PlacePage Test that Clock Is Now Set Correctly Close and Lock the UnitChange the Ribbon Change the Type Section Change the Motor Trouble Shooting Warranty One-Year Limited Warranty
Top Page Image Contents