Lathem 2121 manual Set the Printed Day and Time

Page 6

Model 2121 Time Recorder User’s Guide

3.2While pushing the lock lever down, lift the entire type section as shown below until it locks into place horizontally. It will click distinctly when it locks place.

4.Set the Printed Day and Time

4.1Locate and press the red overthrow lever until it clicks. This releases the print wheels, allowing you to turn them.

Page 4

Image 6

Contents Model User’s Guide Contents Ordering Accessories Http//shop.lathem.comMount Clock in Suitable Location Unlock and Remove the CoverLift the Type Section Set the Printed Day and Time Day Wheel Set Hands on Clock Face Advance Print Wheels and Hands Lower the Type Section into PlacePage Test that Clock Is Now Set Correctly Close and Lock the UnitChange the Ribbon Change the Type Section Change the Motor Trouble Shooting Warranty One-Year Limited Warranty