Casio ACS V6000 manual Parameter Description

Chapter 3: Accessing a Virtual Console Server via the Web Manager 31

Parameter	Description
DTR Off Interval	Interval in seconds used by DTR Mode Off Interval in milliseconds.
	Default: 100.
Line Feed Suppression	Enables the suppression of the LF character after the CR character.
	Default: Disabled.
Null After CR	Enables the suppression of the NULL character after the CR
Suppression	character. Default: Disabled.
Transmission Interval	The interval the port waits to send data to a remote client in
	milliseconds. Default: 20.
Break Sequence	Sequence used to send a break signal to the serial port. Not available
	for Raw. Default: ~break.
Break Interval	Interval for the break signal in milliseconds. Not available for Raw.
	Default: 500.
Log In/Out Multi	Enables the notification to multi-session users when a new user logs in
Session Notification	or a user logs out. Not available for Raw. Default: Disabled.
Informational Message	Displays an information message when a target session is opened. Not
Notification	available for Raw. Default: Enabled.
Data Buffering
Status	Enables or disables data buffering. Default: Disabled.
	Displays the type of data buffering: Local - stores the data buffering file
Type	in the local file system. NFS - stores the data buffering file in the NFS
	server. Syslog - sends the data to the syslog server. DSView - sends
	the data to the DSView 3 software. Default: Local.
Time Stamp	When enabled, adds the time stamp to the data buffering line for a
	Local or NFS database. Default: Disabled.
Log-in/out Message	Includes special notification for logins and logouts in data buffering.
	Default: Disabled.
Serial Session Logging	Enabled - stores data at all times. Disabled - stores data when a CAS
	session is not opened. Default: Enabled.
Alerts
Status	A special event notification will be generated when input data matches
	one of the alert strings. Default: Disabled.
Alert Strings	Strings used to generate event notifications. Default: Empty.