Casio ACS V6000 manual Using Telnet or SSH

Page 12

Chapter 2: Installation 7

3.Click Edit Virtual Machine Settings from the Getting Started tab.

4.Click Add, click Serial Port and then click Next.

5.Click Connect Via Network in the Select Port Type field, then click Next.

6.Click Project. In the Port URI field, enter the serial port on the virtual console server the virtual machine will use to connect. The syntax of this field is ACSID://ttySxx, where xx is the serial port number on virtual console server. You can enter just ACSID if you do not have a specific serial port you want to use for the association.

NOTE: The virtual console server will append a unique ID after ttySxx to associate this virtual serial port to the specific virtual console server.

7.Enable use of the Virtual Serial Port Concentrator and enter the location in the vSPC URI field. The syntax of this field is telnet://<ACS v6000>:<vSPC port> where <ACS v6000> is the IP address or hostname of the virtual console server and <vSPC port> is the vSPC port configured in the virtual console server to listen for connections.

NOTE: You can skip step 7 if you do not know the virtual console server's IP address or the vSPC port.

8.Click Next, review the information on the Ready to Complete page and click Finish.

NOTE: To complete the association between the virtual machine's serial port and the virtual console server's serial port, you can use the the virtual console server's web manager or CLI. See Chapter 3 or the ACS v6000 Command Reference Guide for more information.

To complete configuration, you must redirect the virtual machine's console to the created serial port. Refer to the documentation included with your virtual machine for instruction on how to perform this step.

Using Telnet or SSH

An authorized user can use a Telnet or SSH client to make a connection directly to the console of a device if all of the following are true:

The Telnet or SSH:

protocol is enabled in the selected security profile

protocol is configured for the port

client is available, and it is enabled on the computer from which the connection is made

Image 12
Contents ACS Page ACS B L E of C on TE N TS Iii ACS v6000 Installation/Administration/User Guide Features and Benefits Access optionsWeb Manager IPv4 and IPv6 supportFlexible users and groups Authentication SecurityVPN based on IPSec with NAT traversal Packet filteringData logging, notifications, alarms and data buffering Auto discoveryTo create the virtual machine using the vSphere client ACS v6000 virtual console server requirementsPage Using Telnet or SSH To use Telnet to connect to a device through a serial port # telnet hostname IPaddressTo close a Telnet session To use SSH to connect to a device through a serial portTo close an SSH session ACS v6000 Installation/Administration/User Guide Web Manager Overview for Administrators To log into the web managerWizard Mode Wizard Screen To configure network parameters To configure licensesTo configure Ports Expert Mode AccessTo configure users and change the default user passwords To view and connect to devices using the web managerSystem Tools SystemSecurity profiles To configure the Security Profile To configure DSView 3 software security settingsSelect System Security Security Profile Date and Time Help and LanguageVM Settings InformationUsage To configure a vCenter To add an association by DatacenterVCenter To power control targets using the web manager NetworkLicense Settings To configure a network deviceDevices IPv4 and IPv6 static routesConfiguring the firewall HostsFirewall To add a hostProtocol options To add a chainTo change the policy for a default chain IPSecVPNTo add a rule To edit a rulePayload or AH Authentication Header Snmp Configuration To configure SnmpClick Network Snmp To enable or disable one or more serial ports PortsSerial ports Select Ports Serial PortsCAS Ctrl-X Parameter Description To copy/clone the configuration of one port to other ports CAS ProfileAuto discovery To configure the input/output strings used by auto answer Select Probe Strings or Match StringsSelect Ports CAS Profile Auto Answer To configure a pool of CAS ports Pool of CAS portsClick Ports Pool of CAS Ports Authentication Pool of CAS Ports Parameters Parameter DescriptionAppliance authentication Authentication serversTo set authentication for the console server To configure a Radius authentication serverTo configure a TACACS+ authentication server Select Authentication Authentication Servers TACACS+To configure an Ldapsad authentication server Select Authentication Authentication Servers LdapsadTo configure a Kerberos authentication server To configure an NIS authentication serverTo configure a DSView authentication server Users Accounts and User GroupsLocal accounts To add new usersTo configure password rules Click Users Local Accounts Password RulesAdmin group User groupsTo view admin Appliance Access Rights Appliance-admin group Shell-login-profileUser group Managing user groupsTo configure a login profile for a user group Check the Enable Log-In Profile boxTo remove members from a user group To add access to serial ports for a user group To assign appliance access rights for custom user groupsTo configure a group in a TACACS+ authentication server To configure a group in a Radius authentication serverEvent Notifications Event ListEvent Destinations To configure Data Buffering Data BufferingSelect Events and Logs Data Buffering To configure Appliance Logging Active SessionsMonitoring Appliance LoggingChange Password To change your own passwordSelect Change Password Web Manager Overview for Regular UsersACS v6000 Installation/Administration/User Guide Appendix a BootP Configuration Retrieval ConfigurationTo resolve an issue Appendix B Technical SupportFor Technical Support