Casio ACS V6000 manual

Page 11

6ACS v6000 Installation/Administration/User Guide

7.In the Number of NICs field, type 1. Confirm the network is VM Network and the adaptor is Flexible, then click Next.

8.Confirm the Disk Size is 2 GB, then click Next.

9.Click Finish to complete the configuration of the virtual console server on the ESX or ESXi server.

10.In the Side Navigation Bar, click the name of the virtual console server.

11.Click Edit Virtual Machine Settings in the Getting Started page.

12.Enter 512 MB in the Memory Size field and click OK to save the configuration.

To install the virtual console server onto the virtual machine:

1.Click the Console tab from the summary screen of the created virtual machine for the virtual console server.

2.Turn on the virtual machine.

NOTE: The virtual machine will fail to boot since there is no operating system installed.

3.Click Connect CD/DVD, and in the drop-down box select the virtual console server's ISO image.

4.Reboot the virtual console server by clicking CTL-ALT-INSERTin the console area. The virtual console server will reboot from the ISO image.

5.Read and accept the End User License Agreement. The virtual console server will reboot after installation.

6.After the virtual console server has rebooted, disconnect from the ISO image.

The virtual console server will now boot from GNU GRUB. Press Enter to boot the image or wait for the image to boot automatically. After booting the image, the virtual console server interface will be available. The virtual console server is ready to be configured and have the license for virtual serial ports installed.

It is necessary create and configure the virtual serial ports used by the virtual server. The serial port created on the virtual server will be connected to one of the serial ports created on the ACS v6000 virtual console server.

To add a virtual serial port to the virtual machine to be used as console:

1.Using the VMware vSphere client, log in to the vCenter.

2.Select the virtual machine.

NOTE: The virtual machine must be turned off.

Image 11

Contents ACS Page ACS B L E of C on TE N TS Iii ACS v6000 Installation/Administration/User Guide Access options Features and BenefitsFlexible users and groups Web ManagerIPv4 and IPv6 support Packet filtering AuthenticationSecurity VPN based on IPSec with NAT traversalAuto discovery Data logging, notifications, alarms and data bufferingACS v6000 virtual console server requirements To create the virtual machine using the vSphere clientPage Using Telnet or SSH To use SSH to connect to a device through a serial port To use Telnet to connect to a device through a serial port# telnet hostname IPaddress To close a Telnet sessionTo close an SSH session ACS v6000 Installation/Administration/User Guide To log into the web manager Web Manager Overview for AdministratorsWizard Mode Wizard Screen To configure Ports To configure network parametersTo configure licenses To view and connect to devices using the web manager Expert ModeAccess To configure users and change the default user passwordsSecurity profiles System ToolsSystem Select System Security Security Profile To configure the Security ProfileTo configure DSView 3 software security settings Help and Language Date and TimeUsage VM SettingsInformation VCenter To configure a vCenterTo add an association by Datacenter License To power control targets using the web managerNetwork IPv4 and IPv6 static routes SettingsTo configure a network device DevicesTo add a host Configuring the firewallHosts FirewallTo add a chain Protocol optionsTo edit a rule To change the policy for a default chainIPSecVPN To add a rulePayload or AH Authentication Header Click Network Snmp Snmp ConfigurationTo configure Snmp Select Ports Serial Ports To enable or disable one or more serial portsPorts Serial portsCAS Ctrl-X Parameter Description Auto discovery To copy/clone the configuration of one port to other portsCAS Profile Select Ports CAS Profile Auto Answer To configure the input/output strings used by auto answerSelect Probe Strings or Match Strings Click Ports Pool of CAS Ports To configure a pool of CAS portsPool of CAS ports Pool of CAS Ports Parameters Parameter Description AuthenticationTo configure a Radius authentication server Appliance authenticationAuthentication servers To set authentication for the console serverSelect Authentication Authentication Servers Ldapsad To configure a TACACS+ authentication serverSelect Authentication Authentication Servers TACACS+ To configure an Ldapsad authentication serverUsers Accounts and User Groups To configure a Kerberos authentication serverTo configure an NIS authentication server To configure a DSView authentication serverTo add new users Local accountsUser groups To configure password rulesClick Users Local Accounts Password Rules Admin groupTo view admin Appliance Access Rights Managing user groups Appliance-admin groupShell-login-profile User groupTo remove members from a user group To configure a login profile for a user groupCheck the Enable Log-In Profile box To assign appliance access rights for custom user groups To add access to serial ports for a user groupTo configure a group in a Radius authentication server To configure a group in a TACACS+ authentication serverEvent Destinations Event NotificationsEvent List Select Events and Logs Data Buffering To configure Data BufferingData Buffering Appliance Logging To configure Appliance LoggingActive Sessions MonitoringWeb Manager Overview for Regular Users Change PasswordTo change your own password Select Change PasswordACS v6000 Installation/Administration/User Guide Configuration Appendix a BootP Configuration RetrievalAppendix B Technical Support To resolve an issueFor Technical Support