C:Misfeed in the transport area
1Lower the fusing unit release lever.
See "B: Misfeed in the fusing area" (p.82).
2Open the front cover.
To open the front cover, see "INSTALLING THE TONER CARTRIDGE" in the Start Guide.
3 Rotate the roller rotating |
|
knob in the direction of the | Roller rotating knob |
arrow and gently remove |
|
the misfed paper from the |
|
exit area. |
|
4 Raise the fusing unit release lever, close the front cover and then close the side cover by pressing the round projections near the side cover open button. The misfeed (
) indicator will go out and the start ( 
) indicator will light up.
When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged.
D: Misfeed in the lower paper feed area (Peripheral device)
1
Open the lower side cover (under the 
) indicator blinks and the misfed paper is not seen from the area of the lower side cover, pull out the lower paper tray and remove the misfed paper. Then close the lower paper tray.
2
Close the lower side cover.
9
3
Close the side cover by pressing the round projections near the side cover open button. The misfeed (
) indicator will go out and the start ( 
) indicator will light up.
83
