Sharp MX-B200 manual Displaying Total Number of Copies, Example Total number of copies is 1,234

Program	Mode			Parameters
No.
	Copy effective paper	*1	Large (A4 width),
25	width setting function
		2	Small (B5R width)
	(Bypass tray)
26	Copy effective paper	*1	Large (A4 width),
	width setting function
		2	Small (B5R width)
	(Tray 1)
	Copy effective paper
	width setting function	*1	Large (A4 width),
27	(Tray 2)
	(Only operates when	2	Small (B5R width)
	a lower paper tray is
	installed.)
	Selection of copy
28	start state (Polygon	*1	ON, 2	OFF
	rotation on/off)
	Fusing temperature
29	setting when the	1	Low, *2	High
	bypass tray is used
32	USB 2.0 mode	1	Full-Speed, *2 Hi-Speed
	switching

* Factory default settings are indicated with an asterisk (*).

5 Press the start ( ) key. The right-hand number in the display will be steadily lit and the entered value will be stored.

To change the setting or to set another mode, press the clear key. The unit will return to step 2.

		7
6	Press the light ( ) key to return to the normal copy mode.

DISPLAYING TOTAL NUMBER OF COPIES

Use the following procedure to display the total number of copies.

Press and hold down the clear key for approximately 5 seconds. The total number of copies will appear in two steps, each with three digits.

Example: Total number of copies is 1,234.

64