7 | SPECIAL FUNCTIONS |
|
This chapter describes the special functions of this unit. Use these functions as needed.
DESCRIPTION OF SPECIAL FUNCTIONS
Toner save mode
Reduces toner consumption by approximately 10%.
Power save modes
The unit has two power save modes of operation: preheat mode and auto power
Preheat mode
When the unit enters the preheat mode, the power save ( 
) indicator will light up and other indicators will remain on or off as before. In this condition, the fuser in the unit is maintained at a lower heat level, thereby saving power. To copy from the preheat mode, make desired copier selections and press the start (
) key using the normal copying procedure.
Auto power shut-off mode
When the unit enters the auto power 
) indicator will light up and other indicators will go out. The auto power 
) key. Then make desired copier selections and press the start (
) key using the normal copying procedure.
Auto clear
The unit returns to the initial settings a preset amount of time after the end of job. This preset amount of time (auto clear time) can be changed.
Resolution of AUTO & MANUAL mode
You can set the copy resolution used for AUTO and MANUAL ( | ) exposure | 7 |
mode. |
| |
|
|
61
