Sharp MX-B200 manual In the Scanning Source menu, select the location where you

5	In the "Scanning Source" menu, select the location where you
	placed the original in Step 1.
	If you placed a one-sided original
	in the SPF, select "SPF".
6	Click the "Preview" button.
	The preview image will appear.

•If the angle of the image is not correct, reset the original, and click the

"Preview" button again.

• If the preview image is not oriented correctly, click the "Rotate" button in the preview screen. This rotates the preview image 90 degrees clockwise, allowing you to correct the orientation without resetting the original. "Preview screen" (p.57)

•If you set multiple pages in the SPF, the machine previews only the top page of the originals, and then sends it to the original exit area. Return the previewed original to the SPF before starting the scanning job.

7

8

Specify the scanning area and set the scan preferences.

For information on specifying the scan area and setting the scan preferences, see scanner driver Help.

"Preview screen" (p.57)

Scanning a large area at high resolution results in a large quantity of	6
data and a prolonged scanning time. It is recommended that you set
appropriate scanning preferences for the type of original being scanned,

i.e., Monitor, Photo, FAX, or OCR.

When you are ready to begin scanning, click the "Scanning" button.

To cancel a scanning job after clicking the "Scanning" button, press the [Esc] key on your keyboard.

55