Sharp MX-B200 manual Id Card Copy, Press the ID CARD key, Place the ID card on the document glass

ID CARD COPY

You can copy the front and reverse sides of ID card onto a page through this function. The ID card print image is shown as follows.

OriginalsCopies

Front

Back

•ID card copy feature cannot be used in combination with sort function.

		•	The following paper sizes can be used: A5R, A4, B5, 16K. (A5R can
			only be used in bypass tray.)
		•	The image may cut off even if using standard paper size.
		•	In ID card copy mode, scan area and scan number (1 page) cannot be		4
			changed. Scan area is:
			X: 54 + 5 mm (margin),
			Y: 86 + 10 mm (top margin 5 mm and bottom margin 5 mm).
		•	Only making a single copy is available (Number of copies cannot be
			set.).
1	Press the ID CARD key.
	•	The ID CARD indicator will light up. The
		exposure is set to "text", the exposure level is set
		to "3", and the number is set to "1" automatically.
	•	The multi-bypass tray is automatically selected
		when ID card copy feature is selected. The tray
		can be changed manually with the tray select key.
2	Place the ID card on the document glass,
	align with the ID card mark, and press the
	start ( ) key.
	When scan is finished, ID CARD indicator will blink
	and one side of the ID card is scanned into
	memory. (In this case, print will start if pressing
	READ-END key.)
				ID CARD mark
3	Turn and replace the ID card on the document glass, and press
	the start ( ) key.

When scan finished, Copy will begin.

To cancel ID card copy, press the clear key and make sure the ID CARD indicator is off.

34