Ricoh FW770 manual Recommended Originals, ⇒ P.17 Using the Rear Table

Page 18

Basics

Recommended Originals

•You can set originals with weight in the range 21g/m2 (6 lb) to 157 g/m2 (41

1lb).

•You can set original with sizes between 914⋅ 3,000mm (W⋅ L), 36"⋅ 118" and 210⋅ 297mm (W⋅ L), 8.5"⋅ 11". (The maximum width that can be fed: 960mm, 38.4")

•Fix the curl of originals to within the following range.

•For the curl of the leading edge and the trailing edge: R50mm (2.0") or more, H20mm (0.8") or less

•For the curl of the whole paper: φ 30mm (1.2") or more

•When you copy the following originals, set them in the rear table:

⇒ P.17 “Using the Rear Table”

•Thick originals (0.19mm~3mm)

•Originals which cannot be folded.

•Originals less than 297mm (11") in width and more than 1,200mm (48") in length.

•When you copy the following originals, use the Carrier Sheet (option) to set them:

•Piled originals

•Folded originals

•Taped or pasted originals

•Originals which have a hole near the leading edge 40mm (1.6") to the right or left of the center

•Dog-eared originals

•Creased, torn, or clipped-out originals

•Wavy originals

•Pasted originals

•Originals whose leading edge is not straight

•Curled originals

6

Image 18

Contents FW770 Overseas Affiliates ⇒ P.75 Power Connection Means Power on Means Stand by Safety Information Safety During OperationPage Iii Specification Energy Star ProgramHow to Read this Manual SymbolsTable of Contents Specifications Viii Guide to Components Copier ExteriorMain switch Function indicators Operation PanelClear/Stop key Turning on the Power Turn On the Main PowerTurn Off the Main Power ⇒ P.17 Using the Rear Table Recommended OriginalsNon-recommended Originals Recommended Paper Anti-humidity Heater Toner Storage TonerHandling Toner Used TonerCopying Basic Copying Copying to sheetsMake sure that the Bypass Tray is selected Basic Copying Copying to sheets Copying Using the Roll Feeder Option Copying Using the Rear Table Copying Copying onto Roll Paper Option Semi Synchro cuttingPress the Cut Select key1 Copying onto Roll Paper Option Preset Cutting Press the Preset Cut key Variable CuttingYou can change the settings by 1mm 0.1 steps Using The Roll Cutting Rail Option Copying Copy Settings Copying Onto Other MediaAdjusting the Fusing Temperature Manually Adjusting Copy Image Density Making Several Copies of the Same Original Setting a Leading Edge Margin You can set a margin at the leading edge of the copyPartial Copying P will stay on, not blinking Copier starts copying P will disappear Programming Settings You Often Use Program keyChanging the Default Setting Recalling Settings Stored in the Program keyTurn off the main switch User Tools Press the Function Select keyUser Tools Settings You Can Change with User Tools Settings You Can Change with User Tools This value can be changed to 1, 2, 3, or 10 intervals Semi-synchro Cut Length Adjustment+19 Adjust the cut length Standard Density 1 Darker Image Density Default Maintaining Your Copier Changing The Used Toner BottleMaintaining Your Copier Close the upper unit Adding Toner Adding Toner Close the toner cartridge cover and the original table Adding Toner Setting the Roll Paper Holder Changing The Roll Paper SizeRemoving the Roll Paper Holder Changing The Roll Paper Size Loading a Roll Of Paper Insert the paper roll as far as it will go Maintaining Your Copier Hold the paper B , and then slide the cutter a Close the Roll Feeder Loading a New Roll Onto Paper Cutting Rail Option Maintaining Your Copier If Indicator Lights Up If Something Goes WrongIf Jams Occur If the Original is Jammed at the ExitIf Sheet Paper is Jammed in the Feed-in Slot If Sheet Paper is Jammed at the Paper Exit If Roll Paper Jams Troubleshooting If You Cannot See the Roll Paper Jam Hold the paper B , and then slide the cutter a Close the Roll Feeder If Jams Occur Frequently OthersAbsolutely nothing happens If Copies Look WrongCreases Copies Come Out Dog EaredBlack streaks appear on copies Daily Maintenance Clean the Exposure Glass & the Platen PlateDos & Donts Where to Put Your Copier Machine EnvironmentPower Connection Access To Machine Specifications CopierOptions Roll feederIndex

Related manuals

Manual 6 pages 5.13 Kb