Samsung SCLSeries Table.2 Hz VS K Frequency 120 400 10k 20k 40k 100k 10K 100K, Ripple Voltage

Table.2 Hz VS K		10
Frequency	K
120	1.0	1.0
400	0.8
1k	0.65	0.1
10k	0.50
20k	0.45
40k	0.43	0.01
100k	0.40	100		1K	10K	100K	1M
				FREQUENCY(Hz)
1M	0.35
			Fig.4	Correction Coefficient(K)

▶Ripple Voltage

If an excessive ripple voltage is applied to the tantalum capacitors, their internal temperature rises due to Joule heat, resulting in the detriment of their reliability.

SCL Series

▷The tantalum capacitors must be used in such a conditions that the sum of the Working Voltage and ripple voltage peak values does not exceed the rated voltage (Fig. 5)

▷Ensure that an reverse voltage due to superimposed voltages is not applied to the capacitors.

▷The maximum permissible ripple voltage varies with the rated voltage. Ensure that ripple voltage does not exceed the values shown in Figs 6 and 7. If, however, the capacitors are used at a high temperature, the maximum permissible ripple voltage must be calculated as follows:

Vrms(at 55℃) = 0.7 x Vrms(at 25℃) Vrms(at 85℃) = 0.5 x Vrms(at 25℃) Vrms(at 125℃) = 0.3 x Vrms(at 25℃)