Samsung SCLSeries manual Items Test Condition Performance, +85

NO	ITEMS					TEST CONDITION			PERFORMANCE
		THE CAPACITOR SHALL BE SUBJECTED IN TURN TO PROCEDURES SPECIFIED
		BELOW
							CHANGE IN	TANGENT OF		LEAKAGE
		STEP	TEMP.			DURATION	CAPACITANCE	LOSS ANGLE
										CURRENT
							Δ	(D.F.)
							( C )
				± ℃			WITHIN	TABLE 1 ON		WITHIN
		1	25				SPECIFIED			ORIGINAL
				2				PAGE 13
							TOLERANCE			LIMIT
	TEMPERATURE
6				0			- 10 TO 0% OF	TABLE 1 ON
	STABILITY	2	-55 -3		℃	2 HOURS.	INITIAL VALUE	PAGE 13		N/A
		3	25	2		25 MIN.
				± ℃
				+3			0 TO +10% OF	TABLE 1 ON		WITHIN 10X
		4	+85		℃	2 HOURS.				ORIGINAL
				0			INITIAL VALUE	PAGE 13
										LIMIT
			+125 +30				0 TO +12% OF	TABLE 1 ON		WITHIN 12.5X
		5			℃	2 HOURS.				ORIGINAL
							INITIAL VALUE	PAGE 13
										LIMIT

THE CAPACITOR SHALL BE SUBJECTED TO THE SURGE

VOLTAGE AS SPECIFIED ON NEXT PAGE IN A CYCLE OF 6±

0.5MIN. WHICH CONSISTS OF 30±5 SEC. FOLLOWED BY A DISCHARGE PERIOD OF APPROX. 5 MIN 30 SEC. AT A TEMPERATURE OF +85℃ FOR 1,000 CYCLES.

AND THE CAPACITOR SHALL BE STORED UNDER STANDARD ATMOSPHERIC CONDITIONS TO OBTAIN THERMAL EQUILIBRIUM AFTER MEASUREMN\ENT. MEASURING CIRCUIT

+		R1
		S
7 SURGE TEST	V		+
-
		R2	-	Cx

WHERE

R1 : PROTECTIVE SERIES RESISTOR (33Ω)

R2 : DISCHARGE RESISTOR( 33Ω)

Cx : TEST CAPACITOR

V : DC VOLTAGE

S : SWITCH

RATED VOLTAGE	2.5V	4V	6.3V	10V	16V	20V	25V	35V
SURGE VOLTAGE	3.1V	5V	8V	13V	20V	26V	32V	45V

SCL Series