Samsung BP59-00134H-01, SP-L351, SP-L301, SP-L331 Connecting a PC using an HDMI/DVI cable

Page 31

2-13 Connecting a PC using an HDMI/DVI cable

Make sure that your PC and projector are turned off.

1.Connect the [HDMI/DVI IN] terminal of the projector to the HDMI or DVI terminal of your PC using a HDMI/HDMI or HDMI/DVI cable (Not supplied).

-If you are connecting to the HDMI terminal of your PC, use an HDMI/HDMI cable (Not supplied).

-For the supported resolutions and refresh rates, see PC Timing (D-Sub/HDMI) in Section 2-10.

2.If you connected using a HDMI/DVI cable, connect the [PC/DVI AUDIO IN] terminal of the projector to the Audio out terminal of your PC using an audio cable (Not supplied).

-If you connected with a HDMI/HDMI cable, you do not need an audio cable.

Installation and Connection

2-13

Image 31

Contents LCD Projector Table Of Contents Copyright Notice Using this ManualBefore You Start Icons used in this manualCleaning the Surface and the Lens Care and MaintenanceMeaning of Signs Safety PrecautionsIcons used for safety precautions Power RelatedInstallation Related Usage Related Major Safety Precautions Page Package Contents Installation and ConnectionInstalling the Projector Leveling with Adjustable Feet Zoom and Focus Adjustment Screen Size and Projection Distance 548.6 Adjusting the H-Keystone and V-Keystone Installation and Connection Projector / B Screen / C Projected image Projector / B Screen / C Projected image Lamp Replacement Procedure Lamp ReplacementReplacing and Cleaning the Filter Ventilation openings Rear Side You do not have to change the Color quality setup Setting up the PC EnvironmentInstallation and Connection PC Timing D-Sub/HDMI Supported Display ModesAV Timing D-Sub Format Resolution ScanAV Timing Hdmi AV Timing VIDEO/S-VIDEO Connecting the Power Connecting with a PC Connecting a PC using an HDMI/DVI cable Connecting an External Monitor Connecting an HDMI-Compatible Device Connecting an AV device using a D-Sub cable Connecting an AV device with component output Connecting using a Video/S-Video cable Connecting an External Speaker Connecting to a Dynamic IP Dhcp Network Connecting to a NetworkTo use the network function, Network must be set to On Connecting to a Static IP NetworkLocking the product Kensington LockProduct Features UsingName Description Front, UpperBlank Button Remote ControlLED Indications LED IndicationsStand by Lamp Temp Status Classifica State Measures Tion Clearing Indicator ProblemsMenu SUB-MENU Using the Screen Adjustment Menu OSD On Screen DisplayInput PictureText in a still picture appears unnatural This is not supported in AV and S-Video modes Setup Information to supplement information contained in Field1 Option Displayed for a minute whenever the projector is turned on Network Management Management using the Web BrowserProjector Management using PC Software Using Icons Status State Measures Projectors internal temperature is Its normal Normal.low Managing the Projectors Page Using Before Requesting Service TroubleshootingScreen Network Model SpecificationsMore Information Communication Format Complies with the RS232C Standard RS-232C Command TableSerial Communication Protocol Control Item CMD1 CMD2 CMD3 Value Command TableControl Item CMD1 CMD2 CMD3 Value IRE/NOR Left Direct Fac Tory Reset Control Item CMD1 CMD2 CMD3 Value ไทย OFF Europe Contact Samsung WorldwideNorth America Latin AmericaAsia Pacific CISMiddle East & Africa Correct disposal of batteries in this product Europe only Correct Disposal Europe only