Samsung SP-L331, SP-L351, SP-L301, BP59-00134H-01 specifications Screen

Page 62

 

Symptoms

Troubleshooting

 

 

 

Screen and

Cannot see picture images.

Be sure that the power cord of the projector is connected.

External

 

Be sure that the proper input source is selected.

Source

 

Check that the connectors are properly connected to the ports

 

 

 

 

at the back of the projector.

 

 

Check the Remote Control batteries.

 

 

Be sure that the <Color> and<Brightness> settings are not at

 

 

their lower limit.

 

 

 

 

Poor color.

Adjust the <Tint> and <Contrast>.

 

 

 

 

Images are not clear.

Adjust the focus.

 

 

Check if the projector is too far from or too near to the screen.

 

 

 

 

Strange noise.

If a strange sound continues, contact our service center.

 

 

 

 

The operating LED is lit up.

Refer to Corrective Actions According to LED Indications(3-4).

 

 

 

 

Lines appear on screen.

On screen noise may occur when using your PC. Adjust the

 

 

frequency (refresh rate) of the screen.

 

 

 

 

No external device screen is displayed.

Check the operating status for the external device and check

 

 

whether the adjustment items, such as the <Brightness> and

 

 

the <Contrast> have been changed correctly in the <Mode>

 

 

command screen of the Projector menu.

 

 

 

 

Only a blue screen appears.

Be sure to connect the external devices properly. Check the

 

 

connection cables again.

 

 

 

 

Screen appears in black and white or odd

As mentioned above, check the adjustment items such as

 

color or screen is too dark or bright.

<Brightness>, <Contrast>, or <Color> in the menu.

 

 

If you want to restore various settings to their factory defaults,

 

 

run <Factory Default>from the menu.

 

 

 

4-1

Troubleshooting

Image 62
Contents LCD Projector Table Of Contents Icons used in this manual Using this ManualBefore You Start Copyright NoticeCare and Maintenance Cleaning the Surface and the LensPower Related Safety PrecautionsIcons used for safety precautions Meaning of SignsInstallation Related Usage Related Major Safety Precautions Page Installation and Connection Package ContentsInstalling the Projector Leveling with Adjustable Feet Zoom and Focus Adjustment Screen Size and Projection Distance 548.6 Adjusting the H-Keystone and V-Keystone Installation and Connection Projector / B Screen / C Projected image Projector / B Screen / C Projected image Lamp Replacement Lamp Replacement ProcedureReplacing and Cleaning the Filter Ventilation openings Rear Side Setting up the PC Environment You do not have to change the Color quality setupInstallation and Connection Supported Display Modes PC Timing D-Sub/HDMIAV Timing Hdmi Format Resolution ScanAV Timing D-Sub AV Timing VIDEO/S-VIDEO Connecting the Power Connecting with a PC Connecting a PC using an HDMI/DVI cable Connecting an External Monitor Connecting an HDMI-Compatible Device Connecting an AV device using a D-Sub cable Connecting an AV device with component output Connecting using a Video/S-Video cable Connecting an External Speaker Connecting to a Network Connecting to a Dynamic IP Dhcp NetworkConnecting to a Static IP Network To use the network function, Network must be set to OnKensington Lock Locking the productUsing Product FeaturesFront, Upper Name DescriptionRemote Control Blank ButtonStand by Lamp Temp Status LED IndicationsLED Indications Clearing Indicator Problems Classifica State Measures TionPicture Using the Screen Adjustment Menu OSD On Screen DisplayInput Menu SUB-MENUText in a still picture appears unnatural This is not supported in AV and S-Video modes Setup Information to supplement information contained in Field1 Option Displayed for a minute whenever the projector is turned on Management using the Web Browser Network ManagementProjector Management using PC Software Using Icons Status State Measures Projectors internal temperature is Its normal Normal.low Managing the Projectors Page Using Troubleshooting Before Requesting ServiceScreen Network Specifications ModelMore Information Serial Communication Protocol RS-232C Command TableCommunication Format Complies with the RS232C Standard Command Table Control Item CMD1 CMD2 CMD3 ValueControl Item CMD1 CMD2 CMD3 Value IRE/NOR Left Direct Fac Tory Reset Control Item CMD1 CMD2 CMD3 Value ไทย OFF Latin America Contact Samsung WorldwideNorth America EuropeCIS Asia PacificMiddle East & Africa Correct Disposal Europe only Correct disposal of batteries in this product Europe only