Samsung SP-L301, SP-L351, SP-L331, BP59-00134H-01 specifications Connecting an HDMI-Compatible Device

Page 33

2-15 Connecting an HDMI-Compatible Device

Make sure that the AV device and your projector are turned off.

1.Connect the [HDMI/DVI IN] terminal at the back of the projector to the HDMI or HDMI/DVI output terminal of the digital output device using an HDMI/DVI or HDMI/HDMI cable.

-If you are connecting to the HDMI output terminal on the digital output device, use an HDMI/HDMI cable.

-For supported input signal formats, resolutions, and frequencies, see AV Timing(HDMI) in Section 2-10.

2.If you connected using a HDMI/DVI cable, connect the [PC/DVI AUDIO IN] terminal on the projector to the Audio out terminal on your digital output device using an audio cable (Not supplied).

-If you connected with a HDMI/HDMI cable, you do not need an audio cable.

Installation and Connection

2-15

Image 33
Contents LCD Projector Table Of Contents Before You Start Using this ManualIcons used in this manual Copyright NoticeCleaning the Surface and the Lens Care and MaintenanceIcons used for safety precautions Safety PrecautionsPower Related Meaning of SignsInstallation Related Usage Related Major Safety Precautions Page Package Contents Installation and ConnectionInstalling the Projector Leveling with Adjustable Feet Zoom and Focus Adjustment Screen Size and Projection Distance 548.6 Adjusting the H-Keystone and V-Keystone Installation and Connection Projector / B Screen / C Projected image Projector / B Screen / C Projected image Lamp Replacement Procedure Lamp ReplacementReplacing and Cleaning the Filter Ventilation openings Rear Side You do not have to change the Color quality setup Setting up the PC EnvironmentInstallation and Connection PC Timing D-Sub/HDMI Supported Display ModesFormat Resolution Scan AV Timing D-SubAV Timing Hdmi AV Timing VIDEO/S-VIDEO Connecting the Power Connecting with a PC Connecting a PC using an HDMI/DVI cable Connecting an External Monitor Connecting an HDMI-Compatible Device Connecting an AV device using a D-Sub cable Connecting an AV device with component output Connecting using a Video/S-Video cable Connecting an External Speaker Connecting to a Dynamic IP Dhcp Network Connecting to a NetworkTo use the network function, Network must be set to On Connecting to a Static IP NetworkLocking the product Kensington LockProduct Features UsingName Description Front, UpperBlank Button Remote ControlLED Indications LED IndicationsStand by Lamp Temp Status Classifica State Measures Tion Clearing Indicator ProblemsInput Using the Screen Adjustment Menu OSD On Screen DisplayPicture Menu SUB-MENUText in a still picture appears unnatural This is not supported in AV and S-Video modes Setup Information to supplement information contained in Field1 Option Displayed for a minute whenever the projector is turned on Network Management Management using the Web BrowserProjector Management using PC Software Using Icons Status State Measures Projectors internal temperature is Its normal Normal.low Managing the Projectors Page Using Before Requesting Service TroubleshootingScreen Network Model SpecificationsMore Information RS-232C Command Table Communication Format Complies with the RS232C StandardSerial Communication Protocol Control Item CMD1 CMD2 CMD3 Value Command TableControl Item CMD1 CMD2 CMD3 Value IRE/NOR Left Direct Fac Tory Reset Control Item CMD1 CMD2 CMD3 Value ไทย OFF North America Contact Samsung WorldwideLatin America EuropeAsia Pacific CISMiddle East & Africa Correct disposal of batteries in this product Europe only Correct Disposal Europe only