Samsung SP-L351, SP-L301, SP-L331, BP59-00134H-01 specifications Connecting an External Monitor

Page 32

2-14 Connecting an External Monitor

You can view an image on both your projector and a separate monitor at the same time.

Make sure that your PC and projector are turned off.

1.Connect the [PC IN] terminal at the back of the projector to the D-Sub terminal of your PC using a D-Sub cable.

2.Connect the [PC OUT] terminal of the projector to the D-Sub terminal of a monitor using a D-Sub cable.

-When connecting a monitor using the [PC OUT] function, make sure to connect your PC to the [PC IN] terminal.

-The video on the monitor connected to the [PC OUT] terminal will be normal even if you see a blank screen on your projector.

-The [PC OUT] function will not operate in standby mode.

2-14	Installation and Connection

Image 32

Contents LCD Projector Table Of Contents Using this Manual Before You StartIcons used in this manual Copyright NoticeCare and Maintenance Cleaning the Surface and the LensSafety Precautions Icons used for safety precautionsPower Related Meaning of SignsInstallation Related Usage Related Major Safety Precautions Page Installation and Connection Package ContentsInstalling the Projector Leveling with Adjustable Feet Zoom and Focus Adjustment Screen Size and Projection Distance 548.6 Adjusting the H-Keystone and V-Keystone Installation and Connection Projector / B Screen / C Projected image Projector / B Screen / C Projected image Lamp Replacement Lamp Replacement ProcedureReplacing and Cleaning the Filter Ventilation openings Rear Side Setting up the PC Environment You do not have to change the Color quality setupInstallation and Connection Supported Display Modes PC Timing D-Sub/HDMIAV Timing Hdmi Format Resolution ScanAV Timing D-Sub AV Timing VIDEO/S-VIDEO Connecting the Power Connecting with a PC Connecting a PC using an HDMI/DVI cable Connecting an External Monitor Connecting an HDMI-Compatible Device Connecting an AV device using a D-Sub cable Connecting an AV device with component output Connecting using a Video/S-Video cable Connecting an External Speaker Connecting to a Network Connecting to a Dynamic IP Dhcp NetworkConnecting to a Static IP Network To use the network function, Network must be set to OnKensington Lock Locking the productUsing Product FeaturesFront, Upper Name DescriptionRemote Control Blank ButtonStand by Lamp Temp Status LED IndicationsLED Indications Clearing Indicator Problems Classifica State Measures TionUsing the Screen Adjustment Menu OSD On Screen Display InputPicture Menu SUB-MENUText in a still picture appears unnatural This is not supported in AV and S-Video modes Setup Information to supplement information contained in Field1 Option Displayed for a minute whenever the projector is turned on Management using the Web Browser Network ManagementProjector Management using PC Software Using Icons Status State Measures Projectors internal temperature is Its normal Normal.low Managing the Projectors Page Using Troubleshooting Before Requesting ServiceScreen Network Specifications ModelMore Information Serial Communication Protocol RS-232C Command TableCommunication Format Complies with the RS232C Standard Command Table Control Item CMD1 CMD2 CMD3 ValueControl Item CMD1 CMD2 CMD3 Value IRE/NOR Left Direct Fac Tory Reset Control Item CMD1 CMD2 CMD3 Value ไทย OFF Contact Samsung Worldwide North AmericaLatin America EuropeCIS Asia PacificMiddle East & Africa Correct Disposal Europe only Correct disposal of batteries in this product Europe only