Samsung 500 manual ESC D n1... nk NUL, ESC E n

Chapter 5

Control commands list

ESC D n1... nk NUL

[Name]	Set horizontal tab positions
[Format]	ASCII		ESC	D	n1...nk NUL
	Hex		1B	44	n1...nk 00
	Decimal		27	68	n1...nk 0
[Range]	1	≤ d ≤ 255
	0	≤ k ≤ 32
[Description]	Sets horizontal tab positions.

n specifies the column number (counted from the beginning of the line) for setting a horizontal tab position.

	k indicates the total number of horizontal tab positions to be set.
[Notes]
	The tab position is set at [character width x n] from the beginning
	of the line. The character width includes the right-side space of the
	character, and is twice the normal value when double-width is specified.
	This command deletes horizontal tab positions that have already
	been set.
	When "n = 8" has been set for the horizontal tab position,
	the printing position moves to the ninth digit when HT is executed.
	Up to 32 tab positions can be set. Data exceeding 32 tab positions
	is processed as normal data. Input <n>k in ascending order and place
	a NUL code <00>H at the end when <n>k is less than or equal to the
	preceding value <n>k-1, tab setting is finished and the following data
	is processed as normal data.
	ESC D NUL cancels all horizontal tab positions.
	The previously specified horizontal tab positions do not change,
	even if the character width changes.
[Default]	The default tab positions are at intervals of 8 characters
	(columns 9, 17, 25, ...) for the font B (12 x 14).
[Reference]	HT

ESC E n

[Name]	Turn emphasized mode on/off
[Format]	ASCII	ESC	E	n
	Hex	1B	45	n
	Decimal	27	69	n

[Range]	32 ≤ n ≤ 255
[Description]	Turns emphasized mode on or off.
	When the LSB of n is 0, emphasized mode is turned off.
	When the LSB of n is 1, emphasized mode is turned on.
[Notes]	* Printing is slower in emphasized mode.
	Only the lowest bit of n is enabled.
	The printer does not emphasize bit-images.
	This command and ESC ! turn on and off emphasized mode in the
	same way. The last proceeded command becomes effective.
	Printer output is the same in double-strike (ESC G) and in emphasized.
[Default]	n = 0
[Reference]	ESC !, ESC G

47 48