Samsung Network Printer manual Bonjour, Configuring Wins, Configuring UPnP, Using UPnP

Page 14

Configuring WINS

Access SyncThru Web Service and select Network Settings Æ TCP/IP. You will configure two WINS server addresses, the Primary WINS Server or the Secondary WINS Server. The default value is 0.0.0.0.

In a DHCP server

A DHCP server can support the NBNS (NetBIOS Name Server) option. An administrator has to set the WINS server IP address in the NBNS option.

1Set the IP assignment method of your network print server to DHCP.

2Reboot the print server.

The WINS server will update the printer's NetBIOS name in its database. Users can use the printer name instead of its IP address.

In the network print server

1Configure the WINS server address through SyncThru Web Service or SyncThru Web Admin Service.

2Reboot the print server.

The WINS server will update the printer's NetBIOS name

in its database. Users can use the printer name instead of its IP address.

Bonjour

Bonjour allows for a network system to be easily discovered and its capabilities to be revealed by any Bonjour-compliant client software, such as Print Center Utility built in to Mac OS X. For details, see page 5.2.

UPnP

UPnP is an architecture for pervasive peer-to-peer network connectivity of intelligent appliances, wireless devices, and PCs of all form factors. It is designed to bring easy-to-use, flexible, standards-based connectivity to ad-hoc or unmanaged networks whether in the home, in a small business, public spaces, or attached to the Internet.

UPnP is a distributed, open networking architecture that leverages TCP/IP and Web technologies to enable seamless proximity networking in addition to control and data transfer among networked devices in the home, office, and public spaces.

UPnP is more than just a simple extension of the plug and play peripheral model. It is designed to support zero-configuration, “invisible” networking, and automatic discovery for a wide breadth of device categories from a wide range of vendors. This

3.3

TCP/IP environment

means a device can dynamically join a network, obtain an IP address, convey its capabilities, and learn about the presence and capabilities of other devices. DHCP and DNS servers are optional and are used only if available on the network, while a device can leave a network smoothly and automatically without leaving any unwanted state issues behind.

UPnP supports 6 protocol stacks for addressing, discovery, description, control, eventing, and presentation, but the Samsung Network Printer Card supports only Simple Service Discovery Protocol (SSDP) which allows addressing, description, and discovery.

Configuring UPnP

•Control panel: Refer to the Network Menu setting in your printer user’s guide.

•SyncThru Web Service: Select Network Settings Æ UPnP.

-Auto IP Enabled: You can enable or disable Auto IP. When this option is selected, the network print server cannot find the control point and receive an IP address from the control point. The network print server will create an IP address of “169.254.XXX.XXX.”

-Multicast DNS Enabled: SSDP can use Multicast DNS.

-SSDP Enabled: You can enable or disable SSDP.

-SSDP TTL: You can specify the maximum number of subnets that SSPD multicasts can travel across.

Using UPnP

If SSDP (Simple Service Discovery Protocol) is enabled, your network print server is checked by a control point. This control point is an application which supports finding UPnP devices.

Information on searching and control functions or your network print server’s device information is displayed in an XML page (http://xxx.xxx.xxx.xxx:5200/printer.xml).

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Page Page Contents Appendix Federal Communications Commission FCC For products fitted with EU-approved radio devicesPlace and the system is fully assembled Introduction Package contentsGetting started Supported network environmentsComputer Requirements Installing your Network Printer CardSystem requirements IBMViewing the SyncThru Web Admin Service User’s Guide Installing softwareUninstalling software Programs supplied on the Network Utilities CDUsing SyncThru Web Admin Service IP address setupUsing SetIP Enter your print server’s TCP/IP addresses and click Apply Using SyncThru Web ServiceClick Devices Æ Add device Using Snmp Configuring DHCP/BOOTPConfiguring Snmp TCP/IP environmentConfiguring Ddns Configuring SLPUsing SLP Dynamic DNS DdnsUsing UPnP Configuring WinsConfiguring UPnP BonjourLPR port Printing protocolsStandard TCP/IP port IPP port Configuring IPP in the print serverSamsung Printer Port Windows 2000/XP/2003Additional functions Click Network Settings Æ General ResetClick Network Settings Æ Reset Ethernet speedNetWare printing Configuring NetWareNetWare environment Adding a printer Printing in NetWareAdding a queue Assignments menuEtherTalk environment Configuring EtherTalkConfiguring the printer EtherTalk printingTCP/IP printing Bonjour printerBasic concept and terms Wireless network environmentOverview WEP encryption Ieee 802.11 authenticationWPA Wi-Fi Protected Access IeeeSelect Network Settings Æ Wireless Before configuring the print serverWireless settings Status DescriptionNone Open System No encryption Wireless basic settings Wireless security settingsSecurity Authentication Encryption method Method Mode Enhanced Security mode settings None security mode settingsStatic WEP security mode settings Using EAP-TLS Click ConfigureUsing WPA-PSK Select File Æ Add/Remove Snap-inUsing EAP-TTLS Items Specifications SpecificationsWireless specifications AppendixDisclaimer OpenSSL StatementsOpenSSL License Ddns Dhcp Http SLP Snmp UPnP Ad hoc peer-to-peer mode BonjourBootp Static WEP 6.4 WEP encryption Rev.1.00
Top Page Image Contents