Configuring a Windows client
After the network administrator has configured the network print server, each printer user must install the printer driver and set the print port to Samsung IPP 1.1 Port Monitor.
NOTE: Before following the steps below, each printer user should install the printer driver. If the printer driver is not already installed on the computer, install the printer driver that came with the printer. Select the local port (LPT) when you install the driver.
1From the Windows Start menu, select Settings Æ Printers, or select Printers and Faxes.
2
3In Windows 95/98/Me, click Details.
In Windows NT4.0/2000/XP/2003, click Ports.
4Click Add Port.
5 Select Samsung IPP Port from the Other list and click OK.
6Enter the printer URL and port name and click OK.
7When the port name displays on the print port list, click OK.
Now you can select the network print server from the Print Setup dialogue box to send a job.
Setting IPP security
SyncThru Web Service allows administrators to choose an authentication method and to create or modify user accounts.
1 Run your web browser and access SyncThru Web Service.
2Click Network Settings Æ Raw TCP/IP, LPR, IPP.
• Authentication: You can set a user name and password encryption method (refer to http digest authentication in RFC).
•User DB: You can set a user name and password for IPP printing. You can set up the user database for up to 10 items.
3Click Apply.
NOTE: A user name should be unique for all slots and should not include symbols. The length of the user name and the password should each be less than 7 characters.
3.6
TCP/IP environment
Additional functions
The following are additional functions you can use through SyncThru Web Service or SyncThru Web Admin Service.
Printer properties settings
You can check and modify printer and document properties for an installed printer. For properties that are not supported by the printer driver, an error message indicating that the property is not supported is displayed. These settings are used only for printing from this system to the printer. However, these settings do not affect the printer properties of the network printer.
Firmware upgrade (HTTP)
You can upgrade your printer’s firmware using the HTTP protocol. First, you need to download firmware from the Samsung website (http://www.samsungprinter.com).
NOTE: Before upgrading the firmware, make sure that TCP/IP parameters are entered in the print server.
1Run your web browser and access SyncThru Web Service.
2Click Maintenance Æ Firmware Upgrade.
3Select a firmware type, Printer Firmware or Network Firmware.
4Click Browse, and then select the downloaded new firmware.
5Click Upgrade.
NOTE: It takes a few minutes to upgrading the firmware. After completely upgrade, the printer will be reset.
Default setting (HTTP/SNMP)
You can reset all of your network parameter settings to their default status.
NOTE: All default parameters will be applied after the print server restarts.
IP filtering
This security feature (IP Filtering) provides the ability to prevent unauthorised network access to the network print server based on IP addresses set by a network administrator using SyncThru Web Service.
1Run your web browser and access SyncThru Web Service.