Samsung System requirements, Installing your Network Printer Card, Computer Requirements, Ibm

Page 8

System requirements

The following hardware is required to configure a Samsung printer for network applications.

Computer

Requirements

 

 

IBM -

• 80486 CPU or higher

compatible PC

• Minimum of 16 MB of RAM

 

• 2 MB of free disk space

 

 

Macintosh

• PowerPC 68020 or higher

 

• Minimum of 8 MB of RAM

 

• 2 MB of free disk space

 

 

Installing your Network Printer Card

Before installing the Samsung Network Printer Card, you must have administrator or root privileges on the local system.

1Install the network printer card in the printer. For details, refer to your printer user’s guide.

2Use a twisted pair cable with an RJ-45 connector to connect the printer to your network.

Once a connection is established between the network printer card and your network, the LEDs on the card light green.

Blinks when data packets are being transferred.

Lights when the printer card is

connected to the network.

3Set up your printer's IP address. See “IP address setup” on page 2.2.

1.2

Getting started

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Page Page Contents Appendix Federal Communications Commission FCC For products fitted with EU-approved radio devicesPlace and the system is fully assembled Package contents Getting startedIntroduction Supported network environmentsInstalling your Network Printer Card System requirementsComputer Requirements IBMInstalling software Uninstalling softwareViewing the SyncThru Web Admin Service User’s Guide Programs supplied on the Network Utilities CDUsing SyncThru Web Admin Service IP address setupUsing SetIP Enter your print server’s TCP/IP addresses and click Apply Using SyncThru Web ServiceClick Devices Æ Add device Configuring DHCP/BOOTP Configuring SnmpUsing Snmp TCP/IP environmentConfiguring SLP Using SLPConfiguring Ddns Dynamic DNS DdnsConfiguring Wins Configuring UPnPUsing UPnP BonjourLPR port Printing protocolsStandard TCP/IP port Configuring IPP in the print server Samsung Printer PortIPP port Windows 2000/XP/2003Additional functions Reset Click Network Settings Æ ResetClick Network Settings Æ General Ethernet speedNetWare printing Configuring NetWareNetWare environment Printing in NetWare Adding a queueAdding a printer Assignments menuConfiguring EtherTalk Configuring the printerEtherTalk environment EtherTalk printingTCP/IP printing Bonjour printerBasic concept and terms Wireless network environmentOverview Ieee 802.11 authentication WPA Wi-Fi Protected AccessWEP encryption IeeeBefore configuring the print server Wireless settingsSelect Network Settings Æ Wireless Status DescriptionNone Open System No encryption Wireless basic settings Wireless security settingsSecurity Authentication Encryption method Method Mode Enhanced Security mode settings None security mode settingsStatic WEP security mode settings Click Configure Using WPA-PSKUsing EAP-TLS Select File Æ Add/Remove Snap-inUsing EAP-TTLS Specifications Wireless specificationsItems Specifications AppendixDisclaimer OpenSSL StatementsOpenSSL License Ddns Dhcp Http SLP Snmp UPnP Ad hoc peer-to-peer mode BonjourBootp Static WEP 6.4 WEP encryption Rev.1.00
Top Page Image Contents