Samsung Network Printer manual TCP/IP printing, Bonjour printer

Page 22

TCP/IP printing

Apple added TCP/IP printing to all versions including and after OS 8.6.

NOTE: Ensure that the Macintosh has version 8.6 or later. Earlier versions do not support TCP/IP printing as standard.

An IP printer is a network printer that uses TCP/IP protocols (such as LPD/LPR, IPP, or Socket or Jet Direct) to make itself accessible to your computer. If the IP printer you want to use is not listed when you want to print, you can add it to your list of available printers. To add an IP printer, you need to know its IP address or DNS name.

1Open System Preferences and click Print & Fax.

2Click Printing Æ Set Up Printers.

3If the printer already appears on the Printer List, select the In Menu check box to add it to your list of available

printers. You will see the printer in the Printer pop-up menu the next time you print.

4Choose Printers Æ Add Printer.

5 Choose IP Printing from the pop-up menu.

6Select the appropriate printing protocol from the Printer Type pop-up menu.

7Enter the IP address or DNS name for the printer in the Printer Address field.

8If your printer requires it, type the queue name for your printer in the Queue Name field.

9To use printer-specific features, choose the item appropriate for your printer from the Printer Model pop-up menu, then select your printer in the Model Name list.

10Click Add.

The printer appears on the Printer List as the default printer (in boldface). It also appears in the Printer pop-up menu when you print a document.

5.2

EtherTalk environment

Bonjour printer

Usually used in Macintosh networks to search for network devices, Bonjour consists of IPv4 Link-Local Addressing, Multicast DNS, and DNS Service Discovery. Known as zero configuration networking, Bonjour uses industry standard IP protocols to allow devices to automatically find each other without the need to enter IP addresses or configure DNS servers.

In order to provide a true zero configuration experience, meaning that you do not need to configure network parameters, the printer MUST have Bonjour enabled by default. It is NOT possible to disable any part of Bonjour.

After boot up, check the Bonjour printer name of this printer network card in Mac OS X.

1Open System Preferences and select Print & Fax.

2Click Printing Æ Set Up Printers.

3If the printer already appears on the Printer List, select the In Menu check box to add it to your list of available printers. You will see the printer in the Printer pop-up menu the next time you print.

4Choose Printers Æ Add Printer.

5Choose Bonjour from the pop-up menu. Any Bonjour- enabled printers on your local network or subnetwork appear on the Printer List.

6Select your printer from the Printer List.

7To use printer-specific features, choose the item appropriate for your printer from the Printer Model pop-up menu, then select your printer in the Model Name list.

8Click Add.

The printer appears on the Printer List as the default printer (in boldface). It also appears in the Printer pop-up menu when you print a document.

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Page Page Contents Appendix Federal Communications Commission FCC For products fitted with EU-approved radio devicesPlace and the system is fully assembled Introduction Package contentsGetting started Supported network environmentsComputer Requirements Installing your Network Printer CardSystem requirements IBMViewing the SyncThru Web Admin Service User’s Guide Installing softwareUninstalling software Programs supplied on the Network Utilities CDUsing SetIP IP address setupUsing SyncThru Web Admin Service Click Devices Æ Add device Using SyncThru Web ServiceEnter your print server’s TCP/IP addresses and click Apply Using Snmp Configuring DHCP/BOOTPConfiguring Snmp TCP/IP environmentConfiguring Ddns Configuring SLPUsing SLP Dynamic DNS DdnsUsing UPnP Configuring WinsConfiguring UPnP BonjourStandard TCP/IP port Printing protocolsLPR port IPP port Configuring IPP in the print serverSamsung Printer Port Windows 2000/XP/2003Additional functions Click Network Settings Æ General ResetClick Network Settings Æ Reset Ethernet speed NetWare environment Configuring NetWare NetWare printing Adding a printer Printing in NetWareAdding a queue Assignments menuEtherTalk environment Configuring EtherTalkConfiguring the printer EtherTalk printingTCP/IP printing Bonjour printerOverview Wireless network environmentBasic concept and terms WEP encryption Ieee 802.11 authenticationWPA Wi-Fi Protected Access IeeeSelect Network Settings Æ Wireless Before configuring the print serverWireless settings Status DescriptionSecurity Authentication Encryption method Method Mode Wireless basic settings Wireless security settingsNone Open System No encryption Static WEP security mode settings None security mode settingsEnhanced Security mode settings Using EAP-TLS Click ConfigureUsing WPA-PSK Select File Æ Add/Remove Snap-inUsing EAP-TTLS Items Specifications SpecificationsWireless specifications AppendixOpenSSL License OpenSSL StatementsDisclaimer Bootp Ad hoc peer-to-peer mode BonjourDdns Dhcp Http SLP Snmp UPnP Static WEP 6.4 WEP encryption Rev.1.00
Top Page Image Contents