Belkin AP20500EA3M-BLK user manual Step Connect High-Current Audio Filter 8-Second Delay

Belkin Power Console

Hookup and Installation

Step 4

Connect High-Current Audio Filter (8-Second Delay)

The HiCurrent socket is specifically designed to filter out AC line noise while delivering maximum current to power-hungry amplifiers and other high-current audio components.

Note: The HiCurrent socket is equipped with an eight-second delay. This allows your high-current amplifiers to turn on last and turn off first, avoiding that annoying and potentially damaging “thump” from getting to your speakers.

A.Attach Belkin power cable labels to each component’s power cable before you plug the cable into the HiCurrent socket on the Power Console.

B.Connect your high-current device into the “HiCurrent Filter”. Examples of the most common high-current components are listed below:

1.Amplifiers

2.Powered Sub-Woofers

3.Electrostatic Speakers

Note: You can connect any type of high-current audio component into any of the high-current sockets. You are not limited to the components listed above.

(*89i\Xb\i <Xik_

9