Samsung SRP275APG user manual DLE DC4 fn =, Connector pin, Bit, Hex Decimal Function

DLE ENQ

[Name]	Real-time request to printer
[Format]	ASCII	DLE	ENQ	n
	Hex	10	05	n
	Decimal	16	5	n
[Range]	n = 2
[Default]	None
[Description]	Recovers from an error after clearing the receive and print buffers.

DLE DC4 (fn = 1)

[Name]	Generate pulse at real-time
[Format]	ASCII	DLE	DC4	n	m	t
	Hex	10	14	n	m	t
	Decimal	16	20	n	m	t
[Range]	n = 1
	m = 0, 1
	1 ≤ t ≤ 8
[Description]	Outputs the pulse specified by t to connector pin m as follows in real time:

mConnector pin

0Drawer kick-out connector pin 2

1Drawer kick-out connector pin 5

The pulse ON time is [t x100 ms] and the OFF time is [t x100 ms]

ESC SP

[Name]	Set right-side character spacing
[Format]	ASCII	ESC	SP	n
	Hex	1B	20	n
	Decimal	27	32	n
[Range]	0 ≤ n ≤ 255
[Default]	n = 0
[Description]	Sets the right-side character spacing to nⅹ(horizontal or vertical motion unit).

ESC !

[Name]	Select print mode(s)
[Format]	ASCII	ESC	!	n
	Hex	1B	21	n
	Decimal	27	33	n
[Range]	0 ≤ n ≤ 255
[Default]	n = 1

[Description]	Selects or cancels print modes collectively (emphasized, double-height, double-width, underline)
	using n as follows:
	Bit		On/Off	Hex	Decimal	Function
	0		Off	00		Character font A(9x9)selected
			On	01		Character font B(7x9) selected
	1,2	-		-	-	Undefined
	3		Off	00	0	Emphasized mode not selected
			On	08	8	Emphasized mode selected
	4		Off	00	0	Double-height mode not selected
			On	10	16	Double-height mode selected
	5		Off	00	0	Double-width mode not selected
			On	20	32	Double-width mode selected
	6		Off	-	-	Undefined
	7		Off	00	0	Underline mode not selected
			On	80	128	Underline mode selected

4-6