Samsung SRP275APG user manual ESC u, Hex Decimal Status

Page 52

ESC u

[Name]	Transmit peripheral device status
[Format]	ASCII	ESC		u		n
	Hex	1B		75		n
	Decimal	27		117		n
[Range]	n = 0, 48
[Description]	Transmits the peripheral device status of 1 byte.
[Notes]	• The peripheral device status to be transmitted is as follows:

	Bit	Binary		Hex		Decimal	Status
	0	0					Drawer kick-out connector pin 3 is LOW.
	0	1					Drawer kick-out connector pin 3 is HIGH.
		1					Drawer kick-out connector pin 3 is HIGH.
	1-3	-		-		-	Undefined.
	4	0		00		0	Not used. Fixed to Off.
	5,6	-		-		-	Undefined.
	7	0		00		0	Not used. Fixed to Off.

ESC v

[Name]	Transmit paper sensor status
[Format]	ASCII	ESC	v
	Hex	1B	76
	Decimal	27	118

[Description]	Transmits the status of paper sensor(s) as 1 byte of data.
[Notes]	• The paper sensor status to be transmitted is as follows:
	Bit		Binary			Hex	Decimal			Status
	0,1		00		00		0			Paper near end sensor: paper adequate.
			11		03		3			Paper near end sensor: paper near end.
	2,3		00		00		00			Paper end sensor: paper present.
	2,3		11			0C	12			Paper end sensor: paper not present.
			11			0C	12			Paper end sensor: paper not present.
	4		0		00		0			Not used. Fixed to Off.
	5,6		-		-		-			Undefined.
	7		Off		00		0			Not used. Fixed to Off.

ESC {

[Name]	Turn upside-down printing mode on/off
[Format]	ASCII	ESC	{	n
	Hex	1B	7B	n
	Decimal	27	123	n
[Range]	1 ≤ n ≤ 255
[Default]	n = 0
[Description]	Turns upside-down printing mode on or off.

-When the LSB of n is 0, upside-down printing mode is turned off.

-When the LSB of n is 1, upside-down printing mode is turned on.

4-16

Image 52

Contents USER’S Manual Page EMC and Safety standards Applied CE MarkingSafety precautions To Unplug Table of contents Appendix B Connectors Appendix a Code tableFront view Rear viewPage Page Unpacking Choosing a place for the printerConnecting the cables Connecting the AC adaptorConnecting the interface cable and drawer kick-out cable Connect the AC adapter according to the following procedureInstalling the ribbon cassette Installing the paper roll Changing the paper width Installing the wall mount Option Using the operation panel Control panel Power LED Green ColorError LED Red Color Paper OUT LED Red ColorSelf test Recoverable errors Error LED blinking patternError Description Error LED blinking pattern Recovery Printer does not start printing If any of the lights are on, please check the followingYou want to check the operation of the printer by itself Printer stops printingSelf test To use the hexadecimal dump feature, follow these steps Printing is poorYou want to check a software program Hexadecimal dumpSetting the DIP Switch DIP Switch setting for EpsonESC/POS modeDIP Switch setting for CitizeniDP 3550 mode International Character Selection DSW Code CountryDIP Switch setting for StarSP500 mode Changing the DIP Switch setting Code page selection MSW Character Table Memory Switch Function OffOnly Font B available Customize value Function Selectable value Paper roll width Serial communication Function Selectable valueMemory Switch Setup Mode Example of Memory Switch setup sheetProcedure of Memory Switch setting Settings Memory Switch setting for Star modeFunction Class Default Settings Function Memory Switch Bit Country Specifications MSW 0-4 =FF Command Function Selection MSW Precautions for selecting OptionMemory Switch Bit Function Near end switch FunctionMSW Near end switch Function Contextual Auto-cut FunctionCharacter Table Settings CR Command Functions MSW3-1 MSW3-0 CR IgnoredMSW3-9 MSW3-8 Character Table Once Command notation Explanation of termUndefined commands Settings outside the defined rangeException processing Undefined codesCommands list for Epson mode TM-U220 Commands for SRP-275 seriesCommand Description Hex Command description for Epson mode TM-U220 When auto line feed is disabledFunction StatusHex Bit Binary Hex Decimal StatusConnector pin DLE DC4 fn =Bit Hex Decimal FunctionESC % Mode Number of bits Dot density Set Maximum number of dots Mode Dot DSW1-8 onHorizontal DensityESC = ESC @ ESC J FontESC c ESC aJustification ESC d ESC eESC g ESC g nESC ESC mESC r ESC pESC t ESC u Hex Decimal StatusFS p FS qGS a PaperGS C Function DescriptionGS C p L p H m fn b FunctionGS D Real-time command typeGS E Setting value b Function GS E pL pH fn d1 d2 FunctionGS E p L p H fn a Function Type of customized valueGS E p L p H fn a d1...dk Communication conditionPrinter ID Specification BixolonHex Decimal Status for ASB Decimal Function GS r Commands list for Star mode SP500 DC2ESC L Commands list for Citizen mode iDP3550/3551 Command Description HexadecimalPrinting specification Paper specificationsRibbon cassette specification Description RemarkReliability Electrical characteristicsEnvironment conditions Dimensions & weight Optional featuresDimensions WeightPage Appendix a Code tables 1 Katakana 2 PC850 Multilingual 3 PC860 Portuguese 4 PC863 Canadian-French 5 PC865 Nordic 16 WPC1252 Latin1 17 PC866 Russian 18 PC852 Latin2 19 PC858 Euro 21 PC862 Israel 22 PC864 Arabic 23 Thai character code 24 WPC1253 Greek 25 WPC1254 Turkish 26 WPC1257 Baltic 27 Farsi 28 WPC1251 Russian 29 PC737 Greek 30 PC775 Baltic 31 Thai character code 32 OldCode Israel 33 WPC1255 Israel 34 Thai character code 35 Thai character code International character code table RS-232C Serial I/F 2 RS-232C Serial I/F signal descriptionsRS-232C Serial I/F cable connection Pin no Source Compatibility mode Nibble mode Byte mode IEEE1284 Parallel I/FUSB I/F signal descriptions Pin No Signal name Assignment Color FunctionDrawer kick-out Drawer kick-out cable connectionKN02-00009E Rev