Samsung SRP275APG user manual Printer ID Specification, Bixolon

GS I

[Name]	Transmit printer ID
[Format]	ASCII	GS	I	n
	Hex	1D	49	n
	Decimal	29	73	n
[Range]	1 ≤ n ≤ 3, 49 ≤ n ≤ 51, 65 ≤ n ≤ 68, n = 33
[Default]	None
[Description]	Transmits 1 byte of printer ID which is specified by n as follows:
	n	Printer ID			Specification
	1, 49	Printer model ID			Printer model
	2, 50	Type ID			Printer type
	3, 51	Version ID			Firmware version

Transmits printer information A (common information), using n as follows:

n	Printer ID	Specification
33	Type information	Supported functions

Transmits printer information B (common information), using n as follows:

n	Printer ID	Specification
65	Firmware version	Firmware version
66	Maker name	BIXOLON
67	Printer model	Printer model
68	Serial No	Serial No of the printer

GS V

[Name]	Select cut mode and cut paper
[Format]	Function	A	ASCII	GS	V	m
			Hex	1D	56	m
			Decimal	29	86	m
	Function	B	ASCII	GS	V	m	n
			Hex	1D	56	m	n
			Decimal	29	86	m	n
[Range]	Function A		m = 0, 1, 48, 49
	Function B		m = 65, 66; 0 ≤ n ≤ 255
[Default]	None

[Description]	Select a paper cutting mode using m and then cut the paper, as follows:
	m			Function
	<A>	0,48	Executes a full cut (cuts the paper completely).
		1,49	Executes a partial cut (one point left uncut).
		65		Feeds paper to (cutting position + n × vertical motion unit) and executes
				a partial cut(one point left uncut).
	<B>
		66		Feeds paper to (cutting position + n × vertical motion unit) and executes
				a partial cut(one point left uncut).
[Note for <A>]	• If an auto cutter is not provided, this command is ignored.
[Notes for <B>]	• When n = 0, the printer feeds the paper to the cutting position and cuts it.

•If an auto cutter is not provided, the printer only feeds the paper for specified amount.

•Vertical motion unit is used for calculating a paper feed amount.

4-24