Samsung ML-1860, 1865 manual Storing the toner cartridge, Tips for moving & storing your machine

Page 48

such as benzene or thinner to clean. Printing quality problems can occur and cause damage to the machine.

4.Reinsert the toner cartridge and close the top cover.

5.Plug in the power cord and turn the machine on.

Storing the toner cartridge

Toner cartridges contain components that are sensitive to light, temperature, and humidity. Samsung suggests users follow the recommendations below to ensure the optimum performance, highest quality, and longest life from your new Samsung toner cartridge.

Store this cartridge in the same environment as the printer it will be used in; this should be in controlled office temperature and humidity conditions. The toner cartridge should remain in its original, unopened package until installation – If original packaging is not available, cover the top opening of the cartridge with paper and store it in a dark cabinet.

Opening the cartridge package prior to use dramatically shortens its useful shelf and operating life. Do not store on the floor. If the toner cartridge is removed from the printer, always store the cartridge according to the following guidelines:

Inside the protective bag from the original package.

Store lying flat (not standing on end) with the same side facing up as if it was installed in the machine.

Do not store consumable in any of the following conditions:

-Temperature greater than 40°C (104°F).

-Humidity range less than 20% and not greater than 80%.

-An environment with extreme changes in humidity or temperature.

-Direct sunlight or room light.

-Dusty places.

-A car for a long period of time.

-An environment where corrosive gases are present.

-An environment with salty air.

Handling instructions

Do not touch the surface of the photoconductive drum in the cartridge.

Do not expose the cartridge to unnecessary vibrations or shock.

Never manually rotate the drum, especially in the reverse direction; this can cause internal damage and toner spillage.

Use of non-Samsung and refilled toner cartridge

Samsung Electronics does not recommend or approve the use of non-Samsung brand toner cartridges in your printer including generic, store brand, refilled, or remanufactured toner cartridges.

Samsung’s printer warranty does not cover damage to the machine caused by the use of a refilled, remanufactured, or non-Samsung brand toner cartridge.

Estimated cartridge life

Estimated cartridge life (the life of the toner cartridge yield) depends on the amount of toner that print jobs require. The actual print yield may vary depending on the print density of the pages you print on, operating environment, printing interval, media type, and/or media size. For example, if you print a lot of graphics, the consumption of the toner is high and you may need to change the cartridge more often.

Tips for moving & storing your machine

When moving the machine, do not tilt or turn it upside down. Otherwise, the inside of the machine may be contaminated by toner, which can cause damage to the machine or reduce print quality.

Maintenance_ 48

Image 48
Contents Mono Laser Printer Copyright CopyrightSafety information Important safety symbolsSafety information Operating environmentOperating method Installation / Moving Maintenance / CheckingSupply usage Laser Safety Statement Ozone SafetyRegulatory information Regulatory informationPower Save RecyclingRadio Frequency Emissions FCC Information to the UserCanadian Radio Interference Regulations Declaration of Conformity European Countries Important warningApprovals and Certifications EC CertificationChina only Regulatory information About this user’s guide ConventionAbout this user’s guide Convention Description ExampleFinding more information Material name DescriptionFeatures of your new product Special FeaturesFeatures of your new product Features by Models ML-1860 Series ML-1865 SeriesHigh Speed USB Duplex 2-sided printing Manual Included Introduction Machine overviewFront view IntroductionRear view Control panel overview Understanding the status LED Introducing the useful buttonsStatus Description Function DescriptionPower On/Off Cancel print jobTurning on the machine Setting up the hardware Printing a configuration sheetGetting started Supplied softwareInstalling USB connected machine’s driver System requirementsWindows MacintoshSelect Install now Search againHelp Installing the Unified Linux Driver Open the Applications folder Utilities Print Setup UtilitySelect Uninstall and click Uninstall Root@localhost root#cd /opt/Samsung/mfp/uninstallInstalling the SmartPanel Setting up a host computerSetting up a client computer Sharing your machine locallyBasic setup Setting the default tray and paperUsing The power saving feature From your computerMedia sizes supported in each mode Media and traySelecting print media Changing the tray sizeTips on using the manual feeding method Loading paper in the trayTray Manual feeding in the trayPrinting on special media Types Tray Manual feeding TrayaPlain Thick Thin Envelopes TransparenciesLabels Acceptable UnacceptableUsing the output support Card stock/Custom-sized paperLetterhead/Preprinted paper Single-sided Double-sidedPrinter driver features PrintingBasic printing Printer driverCanceling a print job Using a favorite settingOpening printing preferences PrintUsing help Using special print featuresUsing watermarks Using an existing watermarkChange percentage of your document Fitting your document to a selected paper sizeUsing overlays Print quality optionsChanging the default print settings Setting your machine as a default machinePrinting to a file PRN Macintosh printingChanging printer settings Printer FeaturesPrinter Settings LayoutConfiguring printer properties Linux printingPrinting from applications Printing filesPrinting Using Samsung Easy Printer Manager Windows only Management toolsIntroducing useful management tools Understanding Samsung Easy Printer ManagerUsing Samsung Printer Status Windows only Using the Smart Panel program Macintosh and Linux onlyUsing Easy Capture Manager Samsung Printer Status overviewUsing the Unified Linux Driver Configurator Changing the Smart Panel Program SettingsOpening the Unified Driver Configurator Opening the Troubleshooting GuidePrinters configuration window Ports configurationPrinters tab Classes tabManagement tools Maintenance Cleaning a machineCleaning the outside Cleaning the insideStoring the toner cartridge Tips for moving & storing your machineHandling instructions Use of non-Samsung and refilled toner cartridgeTroubleshooting TroubleshootingRedistributing toner Tips for avoiding paper jamsInside the machine Solving other problems Power problemsCondition Suggested solutions Paper feeding problems Printing problemsCondition Possible cause Suggested solutions Selects print Materials from PrintingWrong Preferences Printing Preferences. Select Paper source Print job isPrinting quality problems ConditionCurl or wave Wrinkles orCreases Back of printoutsCommon Windows problems Common Linux problemsCommon Macintosh problems How to purchase Available supplies Available maintenance partsSupplies Replacing the toner cartridgeSupplies Specifications Hardware specificationsEnvironmental specifications Electrical specificationsPower consumption Print media specifications Contact samsung worldwide Contact Samsung worldwideCountry/Regio Customer Care Center Web Site Philippines Glossary DMPr Dot Matrix PrinterDuplex Duty CycleITU-T No chart IeeeIntranet IP addressResolution ModemNetWare OriginalsSubnet Mask Toner CartridgeUNC Path WatermarkXPS