Samsung ML-4551N manual Printing a demo, Changing the display language, Using toner save mode

Page 22

Printing a demo page

After setting up your printer, print a demo page to make sure that the printer is operating correctly.

Press and hold Demo for about 2 seconds.

Or,

1Press Menu and then OK when 1. Information appears.

2Press the Scroll buttons until Demo Page appears and press OK.

3Press OK when Yes appears. A demo page prints out.

Changing the display language

To change the language that is displayed on the control panel, follow these steps:

1Press Menu until 5. System Setup appears on the bottom line of the display and press OK.

2Press the Scroll buttons until Language appears and press OK.

3Press the Scroll buttons to select the language you want and press OK.

4Press Stop to return to Standby mode.

Using toner save mode

Toner save mode allows the printer to use less toner on each page. Activating this mode extends the life of your toner cartridge and reduces your cost per page beyond what one would experience in the normal mode, but it reduces print quality. This setting is not available with the 1200dpi-Bestsetting.

There are two ways to enable this mode:

Using the control panel button

Press Toner Save on the control panel. The printer must be in Standby mode; the Status LED lights green and Ready is shown on the display.

•If the button backlight is on, the mode is enabled and the printer uses less toner to print a page.

•If the button backlight is off, the mode is disabled and the printer prints in normal mode.

From the software application

You can set toner save mode from the printer properties window on your printer driver. See the Software Section.

Changing the font setting

Your machine has preset the font for your region or country. If you want to change the font which you prefer or set the font under special condition such as the DOS environment, you can change the font setting as follows:

1Press Menu on the control panel until you see 6. Emulation feature.

2Press OK to access the font setting.

3Press the left/right arrow until Setup displays.

4Press the left/right arrow until PCL displays.

5Press the left/right arrow until Symbol displays.

6Press the left/right arrow until your preferred font displays.

7Press OK.

8Press Stop to return to machine ready mode.

Note

Following information shows the proper font list for corresponding languages.

•Russian: CP866, Cyrillic

•Hebrew: 15Q, 8H, 0H (Israel only)

•Greek: GREEK, PC737

•Arabic & Farsi: ARABIC8, WINARABIC, PC864, FARSI,

ISOARABIC.

2.8 <System setup>

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Page Page Contact Samsung World Wide Country Customer Care Center Web SiteContents Installing accessories TroubleshootingSpecifications Important Precautions and Safety Information Canadian Radio Interference Regulations FCC RegulationsReplacing the Fitted Plug for UK Only Openssl License Original Ssleay License Introduction Special featuresSoftware Section Features ML-4550 ML-4551N ML-4551ND You can print in Windows 98/Me/NT 4.0/2000/XP/2003Printer overview Front viewFinding more information Control panel overviewSelecting a location Clearance spaceUsing control panel menus System setupAccessing control panel menus Job manager menu Menu overviewInformation menu Simplex Layout menuOrientation MarginPaper menu Graphic menuSystem Setup menu Emulation menu PostScriptNetwork menu Printing a demo Using toner save modeChanging the font setting Changing the display languageSoftware overview Supplied softwareSystem requirements Printer driver featuresWindows Macintosh LinuxRequirements Via network administration programs Network setupVia the control panel Dynamic addressing BOOTP/DHCP Configuring TCP/IPConfiguring EtherTalk Supported operating systemsRestoring the network configuration Configuring IPX frame typesSetting Ethernet speed Printing a network configurationLoading print media Selecting print mediaSupported sizes of paper Type Size Dimensions Weighta CapacitybType Size Weight Print media for duplex printingGuidelines for special print media Guidelines for selecting and storing print mediaMedia type Guidelines Loading paper Using the standard tray or the optional trays Changing the size of the paper in the trayUsing the multi-purpose tray Load the paper with the side to be printed on facing upUsing manual feed mode Tips on using the multi-purpose trayPrinting to the output tray Face down Selecting an output locationPrinting to the rear cover Face up Basic printing Canceling a print jobPrinting a document Canceling a print job Printing a documentHow to purchase Ordering supplies and accessoriesAccessories Toner cartridgesCleaning the outside of the printer MaintenanceCleaning the printer Cleaning the inside of the printerMaintenance Toner cartridge storage Printing a cleaning sheetMaintaining the toner cartridge Expected cartridge yieldChecking the remaining toner Redistributing toner cartridgeReplacing the toner cartridge Maintenance Clearing the Toner Low Replace Toner message Maintenance partsItems Yield Average Troubleshooting Clearing paper jamsTray Paper feed areaOptional tray Around the toner cartridge Multi-purpose trayDuplex unit area Paper exit areaDuplex jam Condition Suggested solutions Troubleshooting checklistTips for avoiding paper jams Understanding the status LED Understanding display messagesLSU Motor Error Message Meaning Suggested solutions LoadLow Heat Error OPC is CleaningToner cartridge-related messages Solving general printing problems Click the Samsung ML-4550 Settings and Printers. RightSpool Settings button Series PCL 6 printer iconSolving print quality problems Repetitive Condition Suggested solutions VerticalCondition Suggested solutions Curl or wave DefectsCommon Windows problems Common PostScript problemsInstallable Options section to Common Linux problemsCommon Macintosh problems InstalledInstalling a dual in-line memory module Dimm Installing accessoriesPrecautions when installing accessories Disconnect the power cordSetting the memory in the PostScript printer properties Select the Samsung ML-4550 Series PS printerInstalling a network interface card Removing a DimmUsing the hard disk Installing the hard diskSetting the hard disk in the printer properties Storing a job Setting the time and datePrinting with the optional hard disk Printing a stored jobTo delete a file from the queue Printing using the form filesControlling the active job queue To promote a file from the queuePrinter specifications SpecificationsSpecifications and Description ECP Index System requirements Linux 3.3 Macintosh 3.3 Windows Software section Contents Using Windows Postscript Driver Using Your Printer in Linux Typical Installation Installing Printer SoftwareInstalling Software for Local Printing Select Typical installation for a local printer. Click NextCustom Installation Select Custom installation. Click Next Select the components to be installed and click NextInstalling Software for Network Printing Custom Installation Installing Printer Software in Windows Reinstalling Printer Software Changing the Software LanguageRemoving Printer Software NextPrinting a Document Select your printer driver from the Name drop-down listLayout Tab Printer SettingsPaper Orientation Source Paper TabScaling Printing Graphics Tab ResolutionToner Save Mode Advanced OptionsOn the Job Setting Job SettingExtras Tab About Tab Using a Favorite SettingUsing Help Printer TabAdvanced Printing Printing Multiple Pages on One Sheet of Paper N-Up PrintingPrinting Posters Printing BookletsFitting Your Document to a Selected Paper Size Printing on Both Sides of PaperPrinting a Reduced or Enlarged Document NoneCreating a Watermark Using WatermarksUsing an Existing Watermark Editing a WatermarkUsing a Page Overlay Using OverlaysWhat is an Overlay? Creating a New Page OverlayUsing Windows PostScript Driver AdvancedOverview Direct Print Utility Using the shortcut iconUsing the right-click menu PrintingCheck the Share this printer box Setting Up a Host ComputerSetting Up a Client Computer Select Local Port and click New PortUnderstanding Smart Panel Troubleshooting GuidePrinter Setting Toner LevelUsing Printer Settings Utility Opening the Troubleshooting GuideChanging the Smart Panel Program Settings Using Onscreen Help FileInstalling the Unified Linux Driver Installing the Unified Linux DriverGetting Started Uninstalling the Unified Linux Driver Click UninstallOpening the Unified Driver Configurator Using the Unified Driver ConfiguratorPrinters Configuration Double-clickUnified Driver Configurator on the desktopPorts Configuration Configuring Printer PropertiesClasses Tab Printing Files Printing from ApplicationsFile menu Installing Software for Macintosh Click ContinueFor a USB-connected Macintosh Setting Up the PrinterFor a Network-connected Macintosh Mac OS 8.6 ~Layout Setting Changing Printer SettingsPrinting a Document Printing Multiple Pages on One Sheet of Paper Printer Features SettingResolutionQuality Reverse DuplexDuplex Printing Index Resolution Macintosh 36 Windows GGGGGGGGGGGGGRev.2.00

ML-4551N specifications

The Samsung ML-4551N is a high-performance monochrome laser printer designed for small to medium-sized office environments. With its exceptional print quality and robust features, the ML-4551N continues to be a reliable choice for business users seeking efficiency and productivity.

One of the standout features of the ML-4551N is its impressive print speed. Capable of producing up to 47 pages per minute, this printer significantly reduces downtime, allowing businesses to handle large print jobs with ease. The first page out time is also commendably swift, taking as little as 8.5 seconds, ensuring that users can quickly retrieve their documents when needed.

The printer utilizes Samsung’s advanced ReCP (Rendering Engine for Clean Page) technology, which enhances the quality of text and images. This technology works by improving the sharpness of text and providing a rich, detailed output for graphics, making it an ideal choice for producing professional documents such as reports, brochures, and presentations.

Another key characteristic of the ML-4551N is its high paper capacity. The standard paper tray holds up to 250 sheets, while an optional 500-sheet tray can be added, allowing a total input capacity of up to 750 sheets. This large capacity is particularly beneficial for busy offices that require frequent printing without the need for constant paper replenishment.

Connectivity options are essential for modern office environments, and the ML-4551N does not disappoint. It features built-in USB and Ethernet connectivity, enabling multiple users to share the printer over a network effortlessly. Additionally, the printer supports various operating systems, including Windows and Mac, providing versatility to meet diverse user needs.

Energy efficiency is another highlight of the ML-4551N. It comes equipped with Eco Mode, which helps to reduce toner consumption and energy usage, contributing to lower overall operational costs. This focus on eco-friendly functionality aligns with many businesses' sustainability goals.

Overall, the Samsung ML-4551N combines speed, quality, and efficiency, making it a formidable contender in the monochrome laser printer market. Its blend of advanced printing technologies and user-friendly features makes it suitable for various professional applications, establishing it as a preferred choice for organizations looking to enhance their document handling capabilities.
Top Page Image Contents