4Align the connector on the wired network interface card with the connector on the control board. Push the card firmly into the connector on the control board until it is completely and securely in place.
1
2
1wired network connector
2wired network interface card
5Insert and tighten the two screws supplied with your network card.
6Close the control board cover by aligning the groove on it with the notch on the printer and sliding it.
7Reinstall the
8Reconnect the power cord and printer cable (if necessary), and turn the printer on.
Using the hard disk
Installing the hard disk allows the data from your computer to be sent to the print queue of the printer hard disk. This decreases the workload of the computer. You can also use various print features, such as storing a job in the hard disk, proofing a job, and printing private documents.
Installing the hard disk
For order information, see page 7.1.
Review the precautions on page 10.1.
1Turn the printer power off and unplug the power cord and printer cable from the printer.
2Remove the
1
1
3Grasp the control board cover and remove it.
10.4 <Installing accessories>