Samsung ML-4551N manual System Setup menu

System Setup menu

Use the 5. System Setup menu to configure a variety of printer features.

Item	Explanation
Date & Time	See page 10.6 and 10.7.
Form Menu	Note
Select Form	• This menu item is available when the
	optional hard disk is installed.
Language	Values: English, FRANCAIS, Espanol,
	Portugues E., Portugues B., Deutsch, Italiano...
	This setting determines the language of the text
	that appears on the control panel display and
	information printing.
Power Save	Values: [ 5 ] Min, [ 10] Min, [ 15 ] Min, [ 30 ] Min,
	[ 60 ] Min, [ 120 ] Min

When the printer does not receive data for an extended period of time, power consumption is automatically lowered. You can set how long the printer waits before going to power save mode.

Auto	Values: Off, On
Continue

This item determines whether or not the printer continues printing when it detects the paper unmatched to your paper setting.

•Off: If a paper mismatch occurs, an error message will remain on the display and the printer will remain off-line until you insert the correct paper.

•On: If the paper mismatch occurs, an error message will display. The printer will go offline for 30 seconds, then automatically clear the message and continue printing.

Altitude Adj.

Values: Plain, High, Higher, Highest

You can optimize print quality according to your altitude.

Auto CR Values: LF, LF+CR

This item allows you to append the required carriage return to each line feed.

Refer to the following samples:

AA	AA
BB	BB
CC	CC
LF	LF+CR

Item		Explanation
Job Timeout		Values:[0-1800] sec:15
	You can set the length of time the printer waits
	before printing the last page of a print job that
	does not end with a command to print the page.
	When a print time-out occurs, the printer prints the
	page in the print buffer.
Maintenance	This item allows you to maintain your printer.
	•	Clean Drum: Cleans the OPC drum of the toner
		cartridge and produces a cleaning sheet with
		toner debris on it.
	•	Clean Fuser: Cleans the fuser unit inside of the
		printer and produces a cleaning sheet with
		toner debris on it.
	•	CLR Empty MSG.: Prevents the Toner Low
		Replace Toner message from appearing on the
		display. Once you have selected On, this
		setting will be permanently written to the
		memory of the toner cartridge, and this menu
		will be disappeared from the Maintenance
		menu.
	•	Supplies Life: Allows you to check how many
		pages have been printed and how much toner
		are left in the cartridge.
Clear Setting	This menu item allows you to restore the printer’s
	factory default settings.

2.5 <System setup>