Samsung SRP-350 specifications ESC c 4 n, ESC c 5 n, ESC d n, ESC p m t1 t2, FS p n m

ESC c 4 n

[Name]			Select paper sensor(s) to stop printing.
[Format]			ASCII	ESC	c	4	n
			Hex	1B	63	34	n
			Decimal	27	99	52	n
[Range]			0 ≤nL ≤255
[Description]			Selects the paper sensor(s) used to stop printing when a paper-end is
			detected, using n as follows :
	Bit	Off/On		Hex	Decimal		Function
	0		Off	00		0	Paper roll end sensor disable.
			On	01		1	Paper roll end sensor enable.
	1		Off	00		0	Paper roll end sensor disable.
			On	02		2	Paper roll end sensor enable.
	2-7		-	-		-	Undefined.
ESC c 5 n
[Name]			Enable / Disable panel button.
[Format]			ASCII	ESC	c	3	n
			Hex	1B	63	35	n
			Decimal	27	99	53	n
[Range]			0 ≤n ≤255
[Description]			Enables or disables the panel button.

*When the LSB of n is 0, the panel buttons are enabled.

*When the LSB of n is 1, the panel buttons are disabled.

ESC d n

[Name]	Print and feed n lines.
[Format]	ASCII	ESC	d	n
	Hex	1B	64	n
	Decimal	27	100	n
[Range]	0 ≤n ≤255
[Description]	Prints the data in the print buffer and feeds n lines.

ESC p m t1 t2

[Name]	Generate pulse.
[Format]	ASCII	ESC	p	m	t1	t2
	Hex	1B	70	m	t1	t2
	Decimal	27	112	m	t1	t2
[Range]	m = 0, 1, 48, 49
	0 ≤t1 ≤255, 0 ≤t2 ≤255
[Description]	Outputs the pulse specified by t1 and t2 to connector pin m as follows.
m				Connector pin
0, 48				Drawer kick-out connector pin 2
1, 49				Drawer kick-out connector pin 5

ESC t n

[Name]	Select character code table.
[Format]	ASCII	ESC	t	n
	Hex	1B	74	n
	Decimal	27	116	n

[Range]	0 ≤n ≤5, n = 255
[Description]	Selects a page n from the character code table.
n			Page
0		0	(PC437 {USA, standard Europe})
1		1	(Katakana)
2		2	(PC850 {Multilingual})
3		3	(PC860 {Portuguese})
4		4	(PC863 {Canadian-French})
5		5	(PC865 {Nordic})
19		19 (PC858 {Euro})
255		Space page

ESC { n

[Name]	Turns on / off upside-down printing mode.
[Format]	ASCII	ESC	{	n
	Hex	1B	7B	n
	Decimal	27	123	n
[Range]	0 ≤n ≤255
[Description]	Turns upside-down printing mode on or off.

*When the LSB of n is 0, upside-down printing mode is turned off.

*When the LSB of n is 1, upside-down printing mode is turned on.

FS p n m

[Name]	Print NV bit image.
[Format]	ASCII	FS	p	n	m
	Hex	1C	70	n	m
	Decimal	28	112	n	m
[Range]	1 ≤n ≤255
	0 ≤m ≤3, 48 ≤m ≤51
[Description] Prints a NV bit image n using the mode specified by m.
m	Mode	Vertical Dot Density (DPI)				Horizontal Dot Density (DPI)
0, 48	Normal			180		180
1, 49	Double-width			180		90
2, 50	Double-height			90		180
3, 51	Quadruple			90		90

*n is the number of the NV bit image (defined using the FS q command).

*m specifies the bit image mode.

38 39