Samsung SRP-350 Connecting the Cables, Connecting the computer, Connecting the Drawer

1-2. Connecting the Cables

You can connect up the three cables to the printer. They all connect to the connector panel on the back of the printer, which is shown below:

Notes : Before connecting any of the cables, make sure that both the printer and the host are turned off.

1-3. Connecting the computer

You need an appropriate interface cable.

1.Plug the cable connector securely into the printer’s interface connector.

2.Tighten the screws on both sides of the cable connector.

3. Attach the other end of the cable to the computer.

1-4. Connecting the Drawer

WARNING:

Use a drawer that matches the printer specification. Using an improper drawer may damage the drawer as well as the printer.

CAUTION:

Do not connect a telephone line to the drawer kick-out connector; otherwise the printer and the telephone line may be damaged.

Plug the drawer cable into the drawer kick-out connector on the back of the printer next to the power supply connector.

6 7