Samsung SRP-350 specifications Self-test printing Please press the Feed button, Completed

Chapter 3. The self test

The self-test checks whether the printer has any problems. If the printer does not function properly, contact your dealer. The self-test checks the following;

1.Make sure paper roll has been installed properly.

2.Turn on the power while holding down the FEED button. The self-test begins.

3.The self-test prints the current printer status, which provides the control ROM version and the DIP switch setting.

4.After printing the current printer status, self-test printing will print the following, and pause (The PAPER LED light blinks).

Self-test printing.

Please press the FEED button

5.Press the FEED button to continue printing. The printer prints a pattern using the built-in character set.

6.The self-test automatically ends and cuts the paper after printing the following.

*** COMPLETED ***

The printer is ready to receive data as soon as it completes the self-test.

Chapter 4. Code Table

The following pages show the character code tables. To find the character corresponding to a hexadecimal number, count across the top of the table for the left digit and count down the left column of the table for the right digit. For example, 4A = J.

Page 0 ( PC437 : USA, Standard Europe)

( International Character Set : USA )

16 17