Samsung SRP-350 FS q n xL xH yL yH d1…dk1…xL xH yL yH d1…dkn, GS ! n, GS $ nL nH, GS / m

[Range]

FS q n [xL xH yL yH d1…dk]1…[xL xH yL yH d1…dk]n

[Name]	Defined NV bit image.
[Format]	ASCII		FS	q	n	[xL xH yL yH d1…dk]1…[xL xH yL yH d1…dk]n
	Hex		1C	71	n	[xL xH yL yH d1…dk]1…[xL xH yL yH d1…dk]n
	Decimal		28	113	n	[xL xH yL yH d1…dk]1…[xL xH yL yH d1…dk]n
[Range]	1	≤n ≤255
	0	≤xL ≤255

0≤xH ≤3 (when 1 ≤(xL + xH ×256) ≤1023

0≤yL ≤3 (when 1 ≤(xL + xH ×256) ≤288

1≤d ≤255

k = (xL + xH ×256) ×(yL + yH ×256) ×8 Total defined data area = 2M bits (256K bytes)

[Description] Define the NV bit image specified by n.

*n specifies the number of the defined NV bit image.

*xL, xH specifies (xL + xH ×256) ×8 dots in the horizontal direction

for the NV bit image you are defining.

*yL, yH specifies (yL + yH ×256) ×8 dots in the vertical direction for the NV bit image you are defining.

GS ! n

[Name]	Select character size.
[Format]	ASCII	GS	!	n
	Hex	1D	21	n
	Decimal	29	33	n
[Range]	0 ≤n ≤255
	(1 ≤vertical number of times ≤8, 1 ≤horizontal number of times ≤8)

[Description] Selects the character height using bits 0 to 2 and selects the character width using bits 4 to 7, as follows :

Bit	Off/On	Hex	Decimal	Function
0-3	Character height selection. See Table 2
4-7	Character width selection. See Table 1

GS $ nL nH

[Name]	Set absolute vertical print position in page mode.
[Format]	ASCII	GS	$	nL	nH
	Hex	1D	24	nL	nH
	Decimal	29	36	nL	nH
[Range]	0 ≤nL ≤255, 0 ≤nH ≤255
[Description]	* Sets the absolute vertical print starting position for
	buffer character data in page mode.
	* This command sets the absolute print position to
	[(nL + nH ×256)		×(vertical or horizontal motion unit)] inches.

GS * x y d1…d(x ×y ×8)

[Name]	Define downloaded bit image.
[Format]	ASCII	GS	*	x	y	d1…d(x ×y ×8)
	Hex	1D	2A	x	y	d1…d(x ×y ×8)
	Decimal	29	42	x	y	d1…d(x ×y ×8)

1 ≤x ≤255, 1 ≤y ≤48 x x y ≤1536, 0 ≤d ≤255

[Description] Defines a downloaded bit image using the dots specified by x and y.

*x indicates the number of dots in the horizontal direction.

*y indicates the number of dots in the vertical direction.

GS / m

[Name]	Print downloaded bit image.
[Format]	ASCII	GS	/	m
	Hex	1D	2F	m
	Decimal	29	47	m
[Range]	0 ≤m ≤3, 48 ≤m ≤51
[Description] Prints a downloaded bit image using the mode specified by m.
	m selects a mode from the table below :
m	Mode	Vertical Dot Density (DIP)			Horizontal Dot Density (DIP)
0, 48	Normal		180		180

Table 1

Character Width Selection

Hex	Decimal		Width
00	0	1	(normal)
10	16	2	(double-width)
20	32	3
30	48	4
40	64	5
50	80	6
60	96	7
70	112	8

Table 2

Character Height Selection

Hex	Decimal		Height
00	0	1	(normal)
10	16	2	(double-width)
20	32	3
30	48	4
40	64	5
50	80	6
60	96	7
70	112	8

	1, 49	Double-width		180	90
	2, 50	Double-height		90	180
	3, 51	Quadruple		90	90
GS :
[Name]		Start/End macro definition.
[Format]		ASCII	GS	:
		Hex	1D	3A
		Decimal	29	58
[Description] Starts or ends macro definition.

40 41