Changing the Size of the Paper in the Tray
To change the tray size to other size, you must adjust the paper length guide properly.
1Pull the tray out of the printer. Open the paper cover and remove paper from the tray if necessary.
2Pressing and unlatching the guide lock in the top of the tray, pull the tray out manually.
3Load paper into the tray.
4Slide the paper length guide until it lightly touches the end of the paper stack. Squeeze the paper width guide and slide it to the edge of the paper stack without causing it to bend.
For paper smaller than
NOTES:
•Do not push the width guide far enough to cause the material to warp.
•If you do not correctly adjust the width guide, it may cause a paper jam.
5Close the paper cover.
6Slide the tray back into the printer.
2.5