Samsung SF-650 manual Regulatory information, Laser Safety Statement, Ozone Safety

Page 10

Regulatory information

This machine is designed for our sound environment and certified with several regulatory statements.

Laser Safety Statement

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 825.

Class I laser products are not considered to be hazardous. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance or prescribed service condition.

WARNING

Never operate or service the printer with the protective cover removed from Laser/Scanner assembly. The reflected beam, although invisible, can damage your eyes.

When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons:

Ozone Safety

During normal operation, this machine produces ozone. The ozone produced does not present a hazard to the operator. However, it is advisable that the machine be operated in a well ventilated area.

If you need additional information about ozone, request your nearest Samsung dealer.

PERCHLORATE WARNING

This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA.

Perchlorate Material - special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate. (U.S.A. only)

Regulatory information_ 9

Image 10

Contents Page Copyright CopyrightUsing toner saving feature Using power saving feature ContentdsContentds Resolution Darkness CopyingCleaning the drum Checking display messagesSafety information Safety informationImportant safety symbols Operating environment Operating method Installation / Moving Maintenance / CheckingSupply usage Regulatory information Laser Safety StatementOzone Safety Regulatory informationCorrect disposal of batteries in this product RecyclingTaiwan only Germany only Fax Branding Radio Frequency EmissionsRussia only FCC Information to the UserReplacing the Fitted Plug for UK Only Ringer Equivalence NumberYou should also know that Approvals and Certifications Declaration of Conformity European CountriesImportant warning EC CertificationChina only About this user’s guide About this user’s guideConvention Conventio Description ExampleMaterial Name Description Quick Install GuideFinding more information Instructions in the guide to prepare the machineSpecial Features Features of your new productFeatures of your new product Front view IntroductionMachine overview IntroductionRear view Control panel overview Introducing the useful button Power LEDUnderstanding the Status LED Turning on the machineSetting up the hardware Basic setupBasic setup Setting sounds Setting the date and timeChanging the clock mode Changing the display languageKeypad letters and numbers Entering characters using the number keypadEntering alphanumeric characters Correcting numbers or namesUsing the save modes Setting the paperLoading originals Media and trayPreparing originals Document feederSelecting print media Guidelines to select the print mediaCopy mode Media sizes supported in each modeMode Size Source Fax modeLoading paper in the tray TrayLetterhead/ Preprinted paper Setting the paper size and typeUsing the output support SINGLE-SIDED DOUBLE-SIDEDCopying Changing the settings for each copyBasic copy Setting copy timeout Changing the default copy settingsTo scale the copy by directly entering the scale rate Preparing to fax Setting the fax headerFaxing Sending a faxConfirming a transmission Delaying a fax transmissionSending a fax manually Automatic redialingSending a priority fax Adding documents to a reserved delay fax jobCanceling a reserved delay fax job Sending a fax in toll save timeReceiving faxes manually using an extension telephone Receiving manually in Tel modeReceiving automatically in Answering Machine/Fax mode Receiving a faxActivating secure receiving mode Receiving faxes using Drpd modeReceiving in secure receiving mode Deactivating secure receiving modeAdjusting the document settings Forwarding a fax to other destinationSetting up address book Registering a group dial number Using group dial numbersGroup dial numbers Editing a group dial numberPrinting sent fax report automatically Changing the fax setup options Machine status and advanced featureFax setup Available fax setup optionsUsing the advanced fax settings Advanced fax setting optionsChange Default Copy setupChanging the copy setup options Printing a reportClear All Mem Menu overview Items OptionMachine status and advanced feature Cleaning the outside MaintenanceCleaning a machine Cleaning the insideCleaning the scan unit Maintenance Handling instructions Cleaning the drumStoring the Toner cartridge Use of non-Samsung and refilled toner cartridgeTips for moving & storing your machine Troubleshooting TroubleshootingRedistributing toner Clearing original document jams Input MisfeedExit Misfeed Tips for avoiding paper curlsPressure lever Tips for avoiding paper jams Clearing paper jamsInside the machine Exit areaIf you do not see the jammed paper, go to next step Understanding display messages Message Meaning Suggested SolutionsChecking display messages Assigned Power FailureOperation Not Paper JamPrinting problems Solving other problemsPaper feeding problems Printing quality problemsDropouts Light or faded printToner specks White SpotsBackground scatter Toner smearDefects MisformedCondition SkewCopying problems Condition Suggested SolutionFax problems Available maintenance parts Supplies and accessoriesHow to purchase Supplies and accessoriesReplacing the toner cartridge PartsSupplies and accessories Environmental specifications SpecificationsHardware specifications Electrical specificationsType Size Dimensions Print media specificationsTRAY1 Contact Samsung worldwide Contact Samsung worldwideCOUNTRY/REGION Customer Care Center WEB Site Luxemburg Glossary Duplex DefaultDot Matrix Printer Duty CycleFuser Unit EthernetEtherTalk GatewayITU-T No chart MAC addressOriginals ModemNetWare PostScriptProtocol PRN fileSubnet Mask UNC Path Toner CartridgeWatermark Index Toner save mode 25 tray Time setting 23 toner cartridgeTurning on the machine Index