Samsung SF-650 Copy setup, Printing a report, Clearing memory, Changing the copy setup options

Page 45

OPTION

DESCRIPTION

 

 

ECM Mode

This mode helps with poor line quality and makes sure any faxes you send are sent

 

smoothly to any other ECM-equipped fax machine. Sending a fax using ECM may take

 

more time.

 

 

Copy setup

Changing the copy setup options

For copy output, you can set up several options in advance.

1.Press Copy on the control panel.

2.Press Menu until Copy Setup appears.

3.Press the left/right arrow until Default-Changeappears and press OK.

4.Press the left/right arrow until the copy setup item you want appears and press OK.

5.Press the left/right arrow until the setting you want appears and press OK.

6.Repeat steps 4 through 5, as needed.

7.Press Stop/Clear to return to ready mode.

Change Default

OPTION

DESCRIPTION

 

 

Darkness

Adjusts the brightness level to make a copy that is easier to read, when the original

 

contains faint markings and dark images.

Original Type

Improves the copy quality by selecting the document type for the current copy job.

Reduce/Enlarge

Reduces or enlarges the size of a copied image.

No. of Copies

You can enter the number of copies using the number keypad.

 

 

Printing a report

You can print a report on the machine's configuration or font list, etc.

1.Press Menu until Reports appears.

2.Press the left/right arrow until the report or list you want to print appears and press OK.

3.Press OK when Yes appears to confirm printing. The selected information prints out.

OPTION

DESCRIPTION

 

 

Phone Book

This list shows all of the fax numbers currently stored in the machine’s memory.

Sent Report

This report shows information on the faxes you have recently sent.

 

You can set the machine to automatically print this report every 50 communications (See

 

"Available fax setup options" on page42).

Fax RCV Report

This report shows information on the faxes you have recently received.

Configuration

This list shows the status of the user-selectable options. You may print this list to confirm

 

your changes after changing any settings.

Schedule Jobs

This list shows the documents currently stored for delayed faxes along with the starting

 

time and type of each operation.

Send Report

This report shows the fax number, the number of pages, the elapsed time of the job, the

 

communication mode, and the communication results.

 

You can set up your machine to automatically print the message confirmation report after

 

each fax job.

JunkFax Report

This list shows the fax numbers specified as junk fax numbers. To add or delete numbers

 

to or from this list, access the Junk Fax Setup menu (See "Advanced fax setting options"

 

on page43).

 

 

Clearing memory

You can selectively clear information stored in your machine’s memory.

1.Press Menu until Maintenance appears.

2.Press the left/right arrow until Clear Memory appears and press OK.

Machine status and advanced feature_ 44

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Page Copyright CopyrightContentds Using toner saving feature Using power saving featureContentds Copying Resolution DarknessChecking display messages Cleaning the drumImportant safety symbols Safety informationSafety information Operating environmentOperating method Maintenance / Checking Installation / MovingSupply usage Ozone Safety Laser Safety StatementRegulatory information Regulatory informationRecycling Correct disposal of batteries in this productTaiwan only Russia only Radio Frequency EmissionsGermany only Fax Branding FCC Information to the UserRinger Equivalence Number Replacing the Fitted Plug for UK OnlyYou should also know that Important warning Declaration of Conformity European CountriesApprovals and Certifications EC CertificationChina only Convention About this user’s guideAbout this user’s guide Conventio Description ExampleFinding more information Quick Install GuideMaterial Name Description Instructions in the guide to prepare the machineFeatures of your new product Special FeaturesFeatures of your new product Machine overview IntroductionFront view IntroductionRear view Control panel overview Understanding the Status LED Power LEDIntroducing the useful button Turning on the machineBasic setup Setting up the hardwareBasic setup Changing the clock mode Setting the date and timeSetting sounds Changing the display languageEntering alphanumeric characters Entering characters using the number keypadKeypad letters and numbers Correcting numbers or namesSetting the paper Using the save modesPreparing originals Media and trayLoading originals Document feederGuidelines to select the print media Selecting print mediaMode Size Source Media sizes supported in each modeCopy mode Fax modeTray Loading paper in the trayUsing the output support Setting the paper size and typeLetterhead/ Preprinted paper SINGLE-SIDED DOUBLE-SIDEDChanging the settings for each copy CopyingBasic copy Changing the default copy settings Setting copy timeoutTo scale the copy by directly entering the scale rate Faxing Setting the fax headerPreparing to fax Sending a faxSending a fax manually Delaying a fax transmissionConfirming a transmission Automatic redialingCanceling a reserved delay fax job Adding documents to a reserved delay fax jobSending a priority fax Sending a fax in toll save timeReceiving automatically in Answering Machine/Fax mode Receiving manually in Tel modeReceiving faxes manually using an extension telephone Receiving a faxReceiving in secure receiving mode Receiving faxes using Drpd modeActivating secure receiving mode Deactivating secure receiving modeForwarding a fax to other destination Adjusting the document settingsSetting up address book Group dial numbers Using group dial numbersRegistering a group dial number Editing a group dial numberPrinting sent fax report automatically Fax setup Machine status and advanced featureChanging the fax setup options Available fax setup optionsAdvanced fax setting options Using the advanced fax settingsChanging the copy setup options Copy setupChange Default Printing a reportClear All Mem Items Option Menu overviewMachine status and advanced feature Cleaning a machine MaintenanceCleaning the outside Cleaning the insideCleaning the scan unit Maintenance Storing the Toner cartridge Cleaning the drumHandling instructions Use of non-Samsung and refilled toner cartridgeTips for moving & storing your machine Troubleshooting TroubleshootingRedistributing toner Input Misfeed Clearing original document jamsTips for avoiding paper curls Exit MisfeedPressure lever Clearing paper jams Tips for avoiding paper jamsExit area Inside the machineIf you do not see the jammed paper, go to next step Message Meaning Suggested Solutions Understanding display messagesChecking display messages Operation Not Power FailureAssigned Paper JamPaper feeding problems Solving other problemsPrinting problems Printing quality problemsToner specks Light or faded printDropouts White SpotsDefects Toner smearBackground scatter MisformedSkew ConditionCondition Suggested Solution Copying problemsFax problems How to purchase Supplies and accessoriesAvailable maintenance parts Supplies and accessoriesParts Replacing the toner cartridgeSupplies and accessories Hardware specifications SpecificationsEnvironmental specifications Electrical specificationsPrint media specifications Type Size DimensionsTRAY1 Contact Samsung worldwide Contact Samsung worldwideCOUNTRY/REGION Customer Care Center WEB Site Luxemburg Glossary Dot Matrix Printer DefaultDuplex Duty CycleEtherTalk EthernetFuser Unit GatewayMAC address ITU-T No chartNetWare ModemOriginals PostScriptPRN file ProtocolSubnet Mask Toner Cartridge UNC PathWatermark Index Time setting 23 toner cartridge Toner save mode 25 trayTurning on the machine Index
Top Page Image Contents