Samsung SF-650 Operation Not, Assigned, Paper Jam, Open/Close Door, Check Inside, Power Failure

Page 61

MESSAGE

MEANING

SUGGESTED SOLUTIONS

 

 

 

Operation Not

You are doing in the Add/Cancel operation,

Check the display to see if there is any

Assigned

but there is no jobs waiting.

scheduled job. The display should indicate

 

 

them in standby mode, for example, Delay

 

 

Fax.

[Paper Jam 0]

Paper has jammed in the feeding area of the

Clear the jam (See "In tray 1" on page56).

Open/Close Door

paper tray.

 

[Paper Jam 1]

Paper has jammed in the paper exit area.

Clear the jam (See "Inside the machine" on

Open/Close Door

 

page57).

[Paper Jam 2]

Paper has jammed in the fuser area.

Clear the jam (See "In exit area" on

Check Inside

 

page57).

Power Failure

Power has turned off then on and the

You need to start again the job which you

 

machine’s memory has not been saved.

were trying to do before the power failure.

Replace Toner

The toner cartridge has almost reached its

You can choose between Stop or Continue

 

estimated cartridge life.

as shown on the control panel. If you select

 

 

Stop, the printer stops printing and you

 

 

cannot print any more without changing the

 

 

cartridge. If you select Continue, the printer

 

 

keeps printing but the printing quality cannot

 

 

be guaranteed.Replace the toner cartridge

 

 

for the best print quality when this message

 

 

appears. Using a cartridge beyond this

 

 

stage can result in printing quality issues

 

 

(See "Replacing the toner cartridge" on

 

 

page68).

 

 

Samsung does not recommend using

 

 

non-genuine Samsung toner cartridge

 

 

such as refilled or remanufactured.

 

 

Samsung cannot guarantee

 

 

non-genuine Samsung toner

 

 

cartridge's quality. Service or repair

 

 

required as a result of using

 

 

non-genuine Samsung toner

 

 

cartridges will not be covered under

 

 

the machine warranty.

Retry Redial?

The machine is waiting for a specified time

You can press OK to immediately redial, or

 

interval to redial a previously busy station.

Stop/Clear to cancel the redial operation.

[Stop Pressed]

The Stop/Clear button is pressed during a

Try again.

 

copy or fax operation.

 

End of life

The indicated toner cartridge has reached its

Replace the toner cartridge (See "Replacing

Replace new cart

estimated cartridge life. The printer stops

the toner cartridge" on page68).

 

printing.

 

 

Estimated cartridge life means the

 

 

expected or estimated toner cartridge

 

 

life, which indicates the average

 

 

capacity of print-outs and is designed

 

 

pursuant to ISO/IEC 19798 (See

 

 

"Available supplies" on page67).

 

 

The number of pages may be affected

 

 

by operating environment, printing

 

 

interval, media type, and media size.

 

 

Some amount of toner may remain in

 

 

the cartridge even when End of life

 

 

Replace new cart appears and the

 

 

printer stops printing.

 

Prepare new cartridge

Small amount of toner is left in the cartridge.

Prepare a new cartridge for replacement.

 

The estimated cartridge life of toner is close.

You may temporarily increase the printing

 

 

quality by redistributing the toner (See

 

 

"Redistributing toner" on page53).

 

 

 

Troubleshooting_ 60

Image 61
Contents Page Copyright CopyrightUsing toner saving feature Using power saving feature ContentdsContentds Copying Resolution DarknessChecking display messages Cleaning the drumImportant safety symbols Safety informationSafety information Operating environmentOperating method Maintenance / Checking Installation / MovingSupply usage Ozone Safety Laser Safety StatementRegulatory information Regulatory informationCorrect disposal of batteries in this product RecyclingTaiwan only Russia only Radio Frequency EmissionsGermany only Fax Branding FCC Information to the UserReplacing the Fitted Plug for UK Only Ringer Equivalence NumberYou should also know that Important warning Declaration of Conformity European CountriesApprovals and Certifications EC CertificationChina only Convention About this user’s guideAbout this user’s guide Conventio Description ExampleFinding more information Quick Install GuideMaterial Name Description Instructions in the guide to prepare the machineSpecial Features Features of your new productFeatures of your new product Machine overview IntroductionFront view IntroductionRear view Control panel overview Understanding the Status LED Power LEDIntroducing the useful button Turning on the machineSetting up the hardware Basic setupBasic setup Changing the clock mode Setting the date and timeSetting sounds Changing the display languageEntering alphanumeric characters Entering characters using the number keypadKeypad letters and numbers Correcting numbers or namesSetting the paper Using the save modesPreparing originals Media and trayLoading originals Document feederGuidelines to select the print media Selecting print mediaMode Size Source Media sizes supported in each modeCopy mode Fax modeTray Loading paper in the trayUsing the output support Setting the paper size and typeLetterhead/ Preprinted paper SINGLE-SIDED DOUBLE-SIDEDCopying Changing the settings for each copyBasic copy Setting copy timeout Changing the default copy settingsTo scale the copy by directly entering the scale rate Faxing Setting the fax headerPreparing to fax Sending a faxSending a fax manually Delaying a fax transmissionConfirming a transmission Automatic redialingCanceling a reserved delay fax job Adding documents to a reserved delay fax jobSending a priority fax Sending a fax in toll save timeReceiving automatically in Answering Machine/Fax mode Receiving manually in Tel modeReceiving faxes manually using an extension telephone Receiving a faxReceiving in secure receiving mode Receiving faxes using Drpd modeActivating secure receiving mode Deactivating secure receiving modeForwarding a fax to other destination Adjusting the document settingsSetting up address book Group dial numbers Using group dial numbersRegistering a group dial number Editing a group dial numberPrinting sent fax report automatically Fax setup Machine status and advanced featureChanging the fax setup options Available fax setup optionsAdvanced fax setting options Using the advanced fax settingsChanging the copy setup options Copy setupChange Default Printing a reportClear All Mem Items Option Menu overviewMachine status and advanced feature Cleaning a machine MaintenanceCleaning the outside Cleaning the insideCleaning the scan unit Maintenance Storing the Toner cartridge Cleaning the drumHandling instructions Use of non-Samsung and refilled toner cartridgeTips for moving & storing your machine Troubleshooting TroubleshootingRedistributing toner Input Misfeed Clearing original document jamsExit Misfeed Tips for avoiding paper curlsPressure lever Clearing paper jams Tips for avoiding paper jamsExit area Inside the machineIf you do not see the jammed paper, go to next step Understanding display messages Message Meaning Suggested SolutionsChecking display messages Operation Not Power FailureAssigned Paper JamPaper feeding problems Solving other problemsPrinting problems Printing quality problemsToner specks Light or faded printDropouts White SpotsDefects Toner smearBackground scatter MisformedSkew ConditionCondition Suggested Solution Copying problemsFax problems How to purchase Supplies and accessoriesAvailable maintenance parts Supplies and accessoriesParts Replacing the toner cartridgeSupplies and accessories Hardware specifications SpecificationsEnvironmental specifications Electrical specificationsType Size Dimensions Print media specificationsTRAY1 Contact Samsung worldwide Contact Samsung worldwideCOUNTRY/REGION Customer Care Center WEB Site Luxemburg Glossary Dot Matrix Printer DefaultDuplex Duty CycleEtherTalk EthernetFuser Unit GatewayMAC address ITU-T No chartNetWare ModemOriginals PostScriptProtocol PRN fileSubnet Mask UNC Path Toner CartridgeWatermark Index Toner save mode 25 tray Time setting 23 toner cartridgeTurning on the machine Index